Epson EB-G5800

Epson EB-G5800

Installation Multimedia Projectors

Amazing Brightness and Superior Image Quality in XGA Resolution



PRODUCT TYPE Portable Multimedia Projector
PRODUCT NAME Epson EB-G5800
PRODUCT CODE V11H379053
PROJECTION SYSTEM RGB Liquid Crystal Shutter Projection System
PROJECTION METHOD Front / Rear / Ceiling Mount
SPECIFICATION OF MAIN PARTS
LCD Size 0.8 inches with MLA
  Driving method Poly-Silicon TFT Active Matrix
  Pixel number 786432 pixels (1024 x 768 x 3)
  Native resolution XGA
  Aspect ratio 4:3
  Pixel arrangement Cross Stripe
  Refresh Rate 50Hz-60Hz
PROJECTION LENS Type Manual: zoom / focus
  F-number 1.65 - 2.55
  Focus length 21.28 - 37.94mm
  Zoom ratio 1:1.8
PROJECTION LAMP Type E-TORL 330 W UHE
  Optical System Dichroic Mirror Separation & Prism Combine Method
SCREEN SIZE (PROJECTED DISTANCE) 30 to 300 inch [0.77m to 8.11m] (Zoom: Wide),
30 to 300 inch [1.42m to 14.54m] (Zoom: Tele)
100" screen 2.67m – 4.82m
LENS SHIFT RANGE
  MANUAL Vertical +/-50% max
(upward and downward)
    Horizontal +/-10% max
(left and right)
BRIGHTNESS
  High Brightness Mode 5,200 Lumens Light Output
5,200 Lumens Colour Light Output
(Colour mode: Game, Zoom: Wide)
  Low Brightness Mode 4,160 Lumens Light Output
4,160 Lumens Colour Light Output
(Colour mode: Game, Zoom: Wide)
CONTRAST 1000:1
BRIGHTNESS UNIFORMITY 89%
COLOUR REPRODUCTIVITY Full colour (16.77 million colours)
SOUND OUTPUT (Internal speaker) N/A
FUNCTION Pointer, User Logo, A/V mute, Freeze, E Zoom, Test Pattern
EFFECTIVE SCANNING FREQUENCY RANGE (Analog)
PIXEL CLOCK 13.5MHz to 162MHz ( up to UXGA 60Hz )
HORIZONTAL 15KHz to 99KHz
VERTICAL 50Hz to 120Hz
ADJUSTMENT FUNCTION
PROJECTOR / REMOTE CONTROL Keystone / Brightness / Contrast / Tint / Saturation / Sound / Input signal
FOOT ADJUSTER Front-centre / Rear side
TILT ANGLE -2.5  to 10 degrees
KEYSTONE CORRECTION Vertical: -40 to +40 degrees (Zoom: Tele)
Horizontal: -20 to +20 degrees (Zoom: Tele)

QUICK CORNER

Yes
SOURCE SEARCH              Yes
AUTO DETECTION OF RGB YCbCr Yes
MULTI SCREEN COLOUR ADJUSTMENT Yes
OPERATION PANEL PROTECTION Yes
PASSWORD PROTECTED Yes
HIGH ALTITUDE MODE Yes
COLOUR MODE PC: Photo, Presentation, Theatre, Dynamic , sRGB, DICOM SIM, Customized
Video: Sports, Presentation, Theatre, Dynamic , sRGB, Customized
ANALOGUE RGB I/O
DISPLAY PERFORMANCE Native 1024 x 768 pixels
INPUT SIGNAL Signal type Separate signal
  Video signal Analogue (0.7Vpp, 75ohm / Mac 0.714Vpp, 75ohm)
  Sync. signal Separate (positive & negative, bi-polarity 2-5Vpp) / Composite (positive & negative, bi-polarity 2-5Vpp) / Sync-on-green (negative, 0.3Vpp)
INPUT TERMINAL Video D-sub 15pin x 1 Blue-moulding
VIDEO I/O
DISPLAY PERFORMANCE   NTSC: 560 lines PAL: 560 lines (Depends on observation of the multi burst pattern)
INPUT SIGNAL Video standard NTSC / NTSC4.43 / PAL / M-PAL / N-PAL / PAL60 / SECAM
  Video signal Composite Video (1.0Vpp / sync negative, 75ohm) / S-Video (Luminous 0.714Vpp, Chrominous 0.286Vpp, 75ohm) / Component Video (Analog Y level 0.7V 75 ohm / Cr Cb level +/-0.35V 75ohm / sync negative 0.3V or 3-state +/-0.3V on Y) / Video-RGB (0.7Vpp, 75ohm / Mac 0.714Vpp, 75ohm)
INPUT TERMINAL Video

Composite Video: BNC x 1
Component Video: 5-BNC, Mini D-sub 15pin x 1 Blue-molding (in common with Analog RGB connector) Video-RGB: 5-BNC, Mini D-sub 15pin x 1 Blue-molding (in common with Analog RGB connector)

CONTROL I/O
Serial I/O I/O Terminal D-sub 9 pin x 1
  I/O Speed RS-232C
NETWORK I/O
  Wired LAN RJ45 x 1
OPERATING TEMPERATURE 0°C to 40°C (32°F to 104°F), (20% - 80% Humidity unfrozen)
Thermal shutdown > 45 degree C
  0°C to 35°C (32°F to 95°F), ( over 1500m with high altitude mode, High brightness)
OPERATING ALTITUDE 0m to 3000m < 0ft to 9843ft >
(over 1500m / 4,921ft with high altitude mode)
DIRECT POWER ON Yes
DIRECT POWER OFF Yes
COOL-DOWN PERIOD Instant off
THEFT PROOF
  Security Cable Hole Yes
  Kensington Lock Yes
POWER SUPPLY VOLTAGE 100-240V AC±10% 50/60Hz
POWER CONSUMPTION
  Lamp On 442W
  Stand by ( network on ) 11W
  Stand by ( network off ) 0.47W
DIMENSION
EXCLUDE FEET 311.5mm(D) x 470mm(W) x 135mm(H)
MAXIMUM DIMENSION 311.5mm(D) x 470mm(W) x 151.5mm(H)
WEIGHT Approx. 6.6Kg
FAN NOISE  
HIGH BRIGHTNESS MODE 38dB
LOW BRIGHTNESS MODE 32dB
ACCESSORIES
POWER CABLE 3m
COMPUTER CABLE

1.8m, D-sub 15pin (Male - Male)

REMOTE CONTROL Included
BATTERY Alkaline AA x 2
USER MANUAL SET Included (CD-ROM)
PROJECTOR SOFTWARE Included (CD-ROM)
PASSWORD PROTECT STICKER Included
EASY MP
Function Projector control and projector management via network Email notification
SNMP
Crestron Integrated Partner / RoomView
Extron IP Link
PJ Link
AMX Device Discovery
Web Control

* Software compatible with MS Vista
# EMP NS Connection, EMP Monitor or EMP Slidemaker2 software does not support Win XP 64bit or Win Vista 64bit.
WARRANTY
STANDARD WARRANTY 3 years*
*excluding lamp
* For more information visit Epson Projector Warranty
Epson is the registered trademark of Seiko Epson Corporation. Epson ESC/P2 and Epson Stylus are trademarks of Seiko Epson Corporation. MicroDot is a trademark of Epson Australia Pty Limited. All other product names and other company names used herein are for identification purposes only and may be the trademarks or registered trademarks of their respective owners. Epson disclaims any and all rights in those marks. Specifications are subject to change without notice.

Equipment supplied by Epson Australia is designed to function in conjunction with genuine Epson consumables and accessories specifically configured for it.


Usage Conditions
Epson products are designed and made to give highly reliable use and long life when used according to its specifications. With any system, product or device used in situations where human life may be involved or at risk, Epson advises that you should take all necessary steps to ensure the suitability of your Epson product for inclusion in your system, and recommends that you include fail-safe procedures and redundancy support or backup equipment in your system, to maintain the maximum safety margin and optimum system reliability. Examples include but are not limited to – do not interfere with any electrical components within the device, do not use items supplied with the product for purposes other than as intended by Epson (ie mains cords, inks, CDs, plastic wrapping) and do not make modifications to the product.