Epson EMP-3300

Projection system	Dichroic mirror and prism system
LCD panel	33.6 mm Poly-Si TFT active matrix (3 panels)
Number of pixels	921,600 (640 x 480 x 3 panels)
Pixel arrangement	Stripe
Lens	Manual zoom, focus F = 2.5 - 2.9, f = 55 - 77 mm
Lamp	150W metal halide lamp, user replaceable
Image size	0.8m - 7.5m measured diagonally
Projection distance	1.2m - 12.4m
Colour reproduction	24 bit, 16.7 million colours
Brightness	400 lumens (standard)
Illumination ratio	Over 70%
Audio	Built-in stereo speakers (1W x 1W)
Sync H Sync V Sync	15 - 35 kHz 50 - 75 kHz
Main set and remote control	Brightness, contrast, tint, sharpness, volume, source, etc.
Video signal RGB (PC)
Video signal level	0.7Vp-p 75
Analogue RGB	TTL RGB (accepts 3.3V output level)
Sync signal level
Separate H. V	TTL, RGB
Composite	TTL, RGB
Sync on green	0.3Vp-p 75
Video Signal level
Composite video	1Vp-p 75
S video	Luminance 1Vp-p Chrominance 0.2867Vp-p 75
Interface standards
NTSC	NTSC, Chroma subcarrier frequency 3.58 Mhz
PAL	CCIR, Chroma subcarrier frequency 4.43 Mhz
SECAM	CCIR
Audio signal
Input
Input voltage	1Vp-p
Input impedance	10k
Output
Output voltage	1Vp-p
Output impedance	600
Power requirement	AC 100 - 120 V / 220 - 240 V ±10%, 50/60 Hz
Power consumption	220W
Dimensions Width Depth Height	285 mm 413 mm 149 mm
Weight	7.7 kg
Supplied accessories	AC cable Video Y-cable 9-25 pin serial adapter Macintosh serial adapter AV cable Remote control unit Batteries (for remote control) EMP Communication kit User manual and warranty card
Warranty	12 months

Product Options

Equipment supplied by Epson Australia is designed to function in conjunction with genuine Epson consumables and accessories specifically configured for it.

Usage Conditions
Epson products are designed and made to give highly reliable use and long life when used according to its specifications. With any system, product or device used in situations where human life may be involved or at risk, Epson advises that you should take all necessary steps to ensure the suitability of your Epson product for inclusion in your system, and recommends that you include fail-safe procedures and redundancy support or backup equipment in your system, to maintain the maximum safety margin and optimum system reliability. Examples include but are not limited to – do not interfere with any electrical components within the device, do not use items supplied with the product for purposes other than as intended by Epson (ie mains cords, inks, CDs, plastic wrapping) and do not make modifications to the product.