Epson EMP-6110

Epson EMP-6110

Installation Multimedia Projectors

Advanced Protection and reliability for a wide range of operational environments.


Overview SpecsConsumables Downloads

PRODUCT TYPE Install Multimedia Projectors
PRODUCT NAME EMP-6110
PRODUCT CODE V11H267053
PROJECTION SYSTEM RGB Liquid Crystal Shutter Projection System
PROJECTION METHOD Front / Rear / Ceiling Mount
SPECIFICATION OF MAIN PARTS
LCD Size 0.8 inches with MLA
  Driving method Poly-Silicon TFT Active Matrix
  Pixel number 786,432 pixels (1024 x 768) x 3
  Native resolution XGA
  Aspect ratio 4:3
  Pixel arrangement Cross Stripe
  Refresh Rate 50Hz-72Hz
PROJECTION LENS Type Manual zoom & focus
  F-number 1.75 - 2.42
  Focus length 24 - 38.2mm
  Zoom ratio 1:1.6
  Lens Cover Integrated Cover glass
LAMP Type 230 W UHE
  Life (estimated) Up to 3500 Hrs High Brightness
Up to 4000 Hrs Low Brightness
SCREEN SIZE (PROJECTED DISTANCE) 30 to 300 inch [1.39 to 14.69m] (Zoom: Tele),
30 to 300 inch [0.83 to 9.06m] (Zoom: Wide)
60" screen 1.8m - 2.9m
OFF SET 10:1
BRIGHTNESS
  High Brightness Mode 3500 Lumens
(Colour mode: Game, Zoom: Wide)
  Low Brightness Mode 2700 Lumens
(Colour mode: Game, Zoom: Wide)
CONTRAST 600:1
BRIGHTNESS UNIFORMITY 90% (Typ.)
COLOUR REPRODUCTION Full colour (16.77 million colours)
VIDEO QUALITY Simple Interlace - Progressive conversion
SOUND OUTPUT 5W monaural
FUNCTION Pointer, User Logo, A/V mute, Freeze, E Zoom, Help
COLOUR MODES PC: Text, Photo, Presentation, Theatre, Game, Blackboard, sRGB, Customised
Video: Sports, Presentation, Theatre, Text, Game, sRGB, Blackboard, Customised
EFFECTIVE SCANNING FREQUENCY RANGE
PIXEL CLOCK 13.5MHz to 162MHz
up to UXGA 60Hz
HORIZONTAL 15KHz to 99KHz
VERTICAL 50Hz to 120Hz
ADJUSTMENT FUNCTION
PROJECTOR / REMOTE CONTROL Brightness / Contrast / Tint / Saturation / Volume / Input signal etc.
FOOT ADJUSTER Front-right and left
TILT ANGLE 0 to 10 degrees
KEYSTONE CORRECTION Vertical: -30 to +30 degrees
SOURCE SEARCH YES
AUTO DETECTION OF RGB/COMPONENT YES
MULTI SCREEN COLOUR ADJUSTMENT YES
OPERATION PANEL PROTECTION FUNCTION YES
PASSWORD PROTECTED YES
(SECURITY FUNCTION) YES
(Protection of User logo, Time lock, Network)
ANALOGUE RGB I/O
DISPLAY PERFORMANCE Native 1024 x 768 pixels
INPUT SIGNAL Signal type Separate signal
  Video signal Analogue (0.7Vp-p, 75ohm / Mac 0.714Vp-p, 75ohm)
  Sync. signal Separate (positive & negative, bi-polarity 2-5Vp-p) / Composite (positive & negative, bi-polarity 2-5Vp-p) / Sync-on-green (negative, 0.3Vp-p)
  Audio signal 500mVrms / 47K-ohm
INPUT TERMINAL Video Mini D-sub 15pin x2 Blue mouldings
  Audio Stereo mini jack x2
OUTPUT SIGNAL Video Signal Analog (0.7Vpp, 75ohm / Mac 0.714Vpp, 75ohm)
  Sync. Signal Separate (positive & negative,TTL) / Composite (positive & negative,TTL) /Sync. on green (negative 0.2-0.4 Vpp)
OUTPUT TERMINAL   Video Mini D-sub 15pin x1 Black moulding
  Audio Stereo mini-jack
VIDEO I/O
DISPLAY PERFORMANCE   NTSC: 560 line PAL: 560 line (Depends on observation of the multi burst pattern)
INPUT SIGNAL Video standard NTSC / NTSC4.43 / PAL / M-PAL / N-PAL / PAL60 / SECAM
  Video signal Composite Video (1.0Vpp / Sync. negative, 75ohm) / S-Video (Luminous 0.714Vpp, Chrominous 0.286Vpp, 75ohm) / Component Video (Analog Y level 0.7V 75ohm / Cr Cb level +/-0.35V 75ohm / sync. negative 0.3V or 3-state+/-0.3V on Y) Video-RGB (0.7Vpp, 75ohm / Mac 0.714Vpp, 75ohm
  Audio signal 500mVrms / 47Kohm
INPUT TERMINAL Video Composite Video: RCA (Yellow) x1
S-Video: Mini DIN
Component Video: Mini D-sub 15pin Blue moulding
(in common with Analog RGB connector)
Video-RGB: Mini D-sub 15pin Blue moulding
(in common with Analog RGB connector)
  Audio RCA (White/Red) x2
CONTROL I/O
USB I/O I/O terminal USB connector series B x1 (for mouse, control)
SERIAL I/O I/O terminal D-sub 9pin x1
  I/O signal RS-232C
NETWORK INTERFACE   RJ45 x1
OPERATING TEMPERATURE 0°C to 40°C (32°F to 104°F), (20% - 80% Humidity)
COOL-DOWN PERIOD 0 sec (Instant off)
START-UP PERIOD Approx. 15 seconds
POWER SUPPLY VOLTAGE 100 - 120V / 200 - 240V ±10%, 50/60Hz AC
DIMENSION
EXCLUDE FEET 340(D) x 465(W) x 146(H) mm
MAXIMUM DIMENSION 340(D) x 465(W) x 160(H) mm
WEIGHT Approx. 7Kg
FAN NOISE  
LOW BRIGHTNESS MODE 33dB
HIGH BRIGHTNESS MODE 39dB
ACCESSORIES
POWER CORD 3m
COMPUTER CABLE 1.8m, D-sub 15pin (Male - Male)
REMOTE CONTROL Included
BATTERY Alkaline AAA x 2
PASSWORD PROTECT SEAL Included
Easy MP Part Function ESC/VP.net
E-mail notification
SNMP
Web control
PJ-Link
  
  Software EMP Monitor (for Windows)
OWNER'S MANUAL Included
WARRANTY
STANDARD WARRANTY 3 years*
*excluding lamp
* For more information visit Epson Projector Warranty
PRODUCT OPTIONS
Product Code Item Code Description
ELP-LP45 V13H010L45 Lamp
Epson is the registered trademark of Seiko Epson Corporation. Epson ESC/P2 and Epson Stylus are trademarks of Seiko Epson Corporation. MicroDot is a trademark of Epson Australia Pty Limited. All other product names and other company names used herein are for identification purposes only and may be the trademarks or registered trademarks of their respective owners. Epson disclaims any and all rights in those marks. Specifications are subject to change without notice.

Equipment supplied by Epson Australia is designed to function in conjunction with genuine Epson consumables and accessories specifically configured for it.

Usage Conditions
Epson products are designed and made to give highly reliable use and long life when used according to its specifications. With any system, product or device used in situations where human life may be involved or at risk, Epson advises that you should take all necessary steps to ensure the suitability of your Epson product for inclusion in your system, and recommends that you include fail-safe procedures and redundancy support or backup equipment in your system, to maintain the maximum safety margin and optimum system reliability. Examples include but are not limited to – do not interfere with any electrical components within the device, do not use items supplied with the product for purposes other than as intended by Epson (ie mains cords, inks, CDs, plastic wrapping) and do not make modifications to the product.