| SIZE |
|
| Max Media Width |
64 inch |
| PRINT TECHNOLOGY |
|
| printhead |
DUAL PrecisionCore TFP with advanced VSDT, auto nozzle status analysis & integrated guard |
| Print Operation |
Epson Precision Dot Technology, Intelligent Media Feed System with Advanced Auto Tension Control (ad-ATC), auto head alignment, auto head cleaning, auto media setting, auto skew control, EMX media and print profile management system, self-agitating ink lines. |
| Print Modes |
Uni & Bi-directional |
| Nozzle Configuration |
360 x 2 per colour per head |
| Maximum resolution |
1440 dpi x 1440 dpi |
| Minimum Ink Droplet Size |
4.2 pl |
| INK TECHNOLOGY |
|
| Ink Type |
Pigment-based Solvent |
| Ink Family |
Epson Ultrachrome GS3 |
| Colours |
Dual C, M, Y, K |
| Storage |
8 x 1.5 L CISS |
| Waste System |
4 L reusable tank |
| PERFORMANCE |
|
| Max Speed |
95.3 m²/hr |
(360 x 720 dpi 1 pass) |
| Billboard Production |
52.3 m²/hr |
(720 x 720 dpi 2 pass) |
| Banner Production |
29.4 m²/hr |
(720 x 720 dpi 4 pass) |
| Vinyl Production |
17.6 m²/hr |
(720 x 1440 dpi 6 pass) |
| Film Production |
6.8 m²/hr |
(1440 x 1440 dpi 16 pass) |
| Figures are based on print speed only and do not include provision for image processing time or transmission. Not all print modes are supported by all media and /or RIP software; individual results are subject to variation due to a variety of configuration, operational, and image specific factors. |
| MEDIA SUPPORT |
|
| Loading |
Single Roll, 2” or 3” core, 250 mm max outer diameter & 45 kg max weight |
| Size |
300 to 1626 mm wide, 500 mm min length, 1 mm max thickness |
| Minimum Print Margins |
5 mm left & right (10 mm with guides) |
| Platen Gap |
1.6/2.0/2.5 mm |
| Heater Settings |
30° to 50° C Pre & Platen, 30° to 55° C after (all three heaters individually adjustable) |
| Dryer Settings |
On/Off/Auto |
| Output Format |
Single sheet (manual cut)
Roll (integrated ATU supports 2" or 3" core with 200 mm max outer diameter) |
| OPERATION |
|
| Control Panel |
2.7” Colour LCD |
| Interface |
High Speed USB 2.0 & Ethernet 100Base-TX/1000Base-T |
| Memory |
Main: 2 GB, Network: 128 MB |
| Power Supply |
3 x 220-240 V 5A, 50-60 Hz AC |
| Printer Physical |
2,766 x 1,338 x 972 mm (WxHxD), 336 kg (no ink or media) |
| Control & Utility Software |
Epson Edge Dashboard, Epson Accounting Tool, Epson Communication Driver, Epson Manuals Launcher, Epson LFP Remote Panel 2, Epson NetConfig, Epson NetSetup, Epson NetPrint, Epson Software Updater |
| RIP Software |
Supplied with Epson Edge Print
Also supports a wide range of 3rd party applications |
| Operational Temp |
15° to 35° C (20-32° C recommended) |
| Operational Humidity |
20 to 80% (40 to 60% recommended) |
| Typical Energy Use |
865 W Operating / 525 W Ready / 23 W Sleep |
| Operating Noise |
60.5 dB |
| Operational Space |
3.6 x 1.8 x 2.7 m (WxHxD) |
| WHAT'S IN THE BOX |
|
Printer, Media Supply System (with Stand, Feed and Auto Take-Up), Print Drying System, CISS unit, 1 x user maintenance kit, 1 x waste tank, 8 x cleaning liquid bags, 1 x ink set (8 x 1.5 L bags), 1 x roll of Epson Poster Paper, power cables, set-up guide, utility software and user manuals (on CD), RIP software (on DVD).
An internet connection will be required during installation to enable registration and download of additional utility software. A significant proportion of the included ink and cleaning liquid will be used during the set-up process to clean and prime ink lines while a small amount of media will also be used for initial print testing. |
| Packaging (WxHxD) |
1 x Head Unit |
2,870 x 1021 x 1100 mm, 380 kg |
| |
1 x Media Supply System |
3,100 x 607 x 1064 mm, 80 kg |
| |
1 x Continuous Ink Supply System |
606 x 912 x 894 mm, 74 kg |
| |
1 x Print Drying System |
1,990 x 230 x 365 mm, 15 kg |
| |
1 x Starter Ink & Media Pack |
1,400 x 300 x 300 mm, 40 kg |
| CONFIGURATION OPTIONS |
|
| SCS60660L1YR |
Printer with 1Yr Warranty |
| SCS60660L3YR |
Printer with 1 Yr Wty + 2Yr CoverPlus (3Yrs Total Cover) |
| SCS60660L5YR |
Printer with 1 Yr Wty + 2 x 2Yr CoverPlus (5Yrs Total Cover) |
Printers supplied through Epson Australia and New Zealand include a comprehensive 1 year on-site warranty that covers parts and labour on all non-consumable components (including the printheads) for product. CoverPlus enables on-site parts and labour service to be extended. One or more CoverPlus packs can be ordered with the printer or separately up to 365 days from the initial date of purchase to enable cover for 1, 2, 3, 4, 5, 6 and 7 year periods (total cover cannot exceed 7 years).
Service and support is provided in conjunction with the Authorised Large Format Reseller through which the product is ordered. Regional locations and certain installation situations may attract additional charges. Service may be restricted or limited when equipment is used outside of specification and/or with non-Epson consumables. For full details on coverage, terms and limitations please review the warranty terms listed on this web-site. If you have questions please contact Epson or one of our Authorised Large Format Resellers. |
| RELATED PRODUCTS |
|
| SC-S40600 |
Low to Medium Volume Production |
| SC-S60600 |
Medium to High Volume Production |
| SC-S80600 |
Medium Volume High Colour Production |
| SC-S80660L |
High Volume High Colour Production |
| |
|
