Epson SureColor F10060 - 76"

SureColor F10060 - 76


SIZE  
Max Media Width 76 inch (1950mm)
PRINT TECHNOLOGY
Print Head F10060: 4 x 4.7" Epson PrecisionCore™ TFP
F10060H: 6 x 4.7" Epson PrecisionCore™ TFP
Print Modes Uni & Bi-directional
Features Epson Precision Dot with Multi-layer Half Tone
Variable Sized Droplet Technology (VSDT)
On-board Job Connection, Step & Repeat
Integrated Media Offset & Crash Sensors
Intelligent Auto Feed Management
Ink-less Nozzle Status Monitoring
Auto Nozzle Masking & Recovery
Advanced Print Waveform
Advanced Dust control
Auto Head Alignment
Auto Head Cleaning
Nozzle Configuration 800 x 4 per head/colour
Maximum Resolution 1200 x 1200dpi
Min Droplet Size 3.8pl
INK SYSTEM  
Family Epson Ultrachrome® DS
Type Dye Sublimation
Colours F10060: CYM +HDk
F10060H: CYM +HDk + (LcLm or FyFp)
Supply DUAL Continuous Ink Supply System (CISS) with auto hot-swap
Refills Choice of 3L or 5L box type
PERFORMANCE
Fast Fabric 300 x 600dpi*1  (1.1 Pass) F10060: 255m2/hr
F10060H: 246m2/hr
Standard Fabric 300 x 600dpi*2  (1.5 Pass) F10060: 200m2/hr
F10060H: 193m2/hr
Fast Apparel 600 x 600dpi*2  (2.1 Pass) F10060: 150m2/hr
F10060H: 144m2/hr
Soft Signage 600 x 600dpi*2  (3.1 Pass) F10060: 103m2/hr
F10060H: 99m2/hr
High Quality 600 x 1200dpi*3  (5 Pass) F10060: 52m2/hr
F10060H: 51m2/hr
Max Quality 1200 x 1200dpi*4  (9 Pass) F10060: 29m2/hr
F10060H: 28m2/hr
Figures represent print times only based on the test sample image as shown, produced 1872mm x 2340mm in multiples of 5 with no gaps using Epson Edge Print. Total throughput times for particular jobs will depend on a number of factors including PC specification, RIP application, workflow, networking, file format / size, image content, paper type and print mode.

*1300x300dpi with Two Half Tone Layers    *2300x300dpi with Four Half Tone Layers
*3300x300dpi with Eight Half Tone Layers    *4300x300dpi with Sixteen Half Tone Layers
Print Sample
MEDIA SUPPORT  
Format Single roll
Size 300-1950mm wide, 250mm max diameter/ 60Kg max weight
Thickness 0.04~1mm
Min Margins 3mm left & right (7mm when using Media Holding Plates)
5mm leading & trailing edges
Loading Rear with integrated lifter, Dual front & rear platen locks
Media Handling Media pre-sets
Epson EMX profile support
Pressure reduction spacer support
Advanced Auto Tension Control (Ad-ATC)
Automatic custom media set-up via RGB camera
Selectable event and nozzle pattern check marking
Data insertion at media cut for sublimation direction
Output Sheets (manual cutting)
Roll to roll with integrated Auto Take-Up (914.4mm min roll width)
OPERATION  
Control Panel 9” Colour Touch LCD
Interface High Speed USB 3.0
Ethernet 1000Base-T
Memory 155GB
Language ESC/P Raster
Included Software (Windows) Epson Communications Driver, EpsonNet Setup, EpsonNet Config, EpsonNet Print, Software Updater, User Guide, Manual Launcher & Video Guide
Web Downloads (Windows) Epson Edge Dashboard, LFP Accounting Tool and Edge Print Pro
Web Downloads (Mac) Epson Edge Dashboard, EpsonNet Setup, EpsonNet Config, Software Updater, Software Updater, User Guide (excerpt), Manual Launcher & Video Guide
Web Utility Epson Cloud Solution PORT (Activation requires enrolment in the program, connection of the printer to a network with Internet access and allowance for interactive data transfer.)
Additional Software

Supported by a range of 3rd party applications

ENVIRONMENTAL  
Operational Temp 10°~ 35° (18° ~ 28° recommended)
Operational Humidity 20 ~ 80% with no condensation (40 ~ 60% recommended)
Power Supply 2 x 16A, 240V, 50/60 Hz AC
Power Consumption F10060: 3.9kW Operating / 221W Sleep / 9.6W Off
F10060H: 4.4kW Operating / 230W Sleep / 9.6W Off
Operating Noise 59dB
Dimensions (W x D x H)

F10060: 4607 x 1303 x 1886mm, 736Kg (with CISS, no media holders or ink)
F10060H: 5008 x 1303 x 1886mm, 767Kg (with CISS, no media holders or ink)

Operational Space (W x D x H) 6.0 x 3.5 x 2.0m recommended
WHAT'S IN THE BOX  

Printer, Dryer, Signal Lamp, Media Supply System (MSS) with Auto Take-Up (ATU), Continuous Ink Supply System (CISS), 4/6 x 2 x 3L Ink, 4L re-usable waste bottle, 1 x Cleaning Kit, 1 x Media Cleaning Brush, 1 x Roll of Epson Multi-Purpose Transfer Media, 1 x Cleaning Kit, 1 x Head Wiper Roll, Software CD/DVD and User Guide (except).

Packaging
(W x D x H)

F10060 Printer: 3845 x 1135 x 1864mm, 903Kg
F10060 CISS, MSS, Dryer & ATU: 3852 x 1144 x 1331mm, 330Kg

F10060H Printer: 3845 x 1135 x 1864mm, 924Kg
F10060H CISS, MSS, Dryer & ATU: 3852 x 1144 x 1331mm, 354Kg

Media & Ink Pack (either config): 1650 x 1250 x 180mm, 50Kg

SYSTEM REQUIREMENTS  
A Personal Computer will be required for installation and operation of this printing system. The PC should have a minimum 3Ghz multicore processor with separate GPU, 8GB memory, 250GB HDD (1TB recommended), running 64bit Windows 7/8 or OS X/10.6.8 or greater. For optimum performance it is recommended that 1000Base-T Ethernet networking be employed. A network with external Web access will be required for installation, registration and software activation. Operation of Epson Cloud Solution PORT will require that the printer be connected to a network with Internet access and a router configured for two way data exchange.

The typical operational environment for this printer will require a calendar style heat press which will need to be sourced separately. Please speak with your dealer for recommendations.
CONFIGURATION OPTIONS
SCF100601YR 4c Printer with 1Yr On-Site CoverPlus
SCF100603YR 4c Printer with 3Yr On-Site CoverPlus
SCF100605YR 4c Printer with 5Yr On-Site CoverPlus
SCF10060HL1YR 6c LcLm Printer with 1Yr On-Site CoverPlus
SCF100603HL3YR 6c LcLm Printer with 3Yr On-Site CoverPlus
SCF100605HL5YR 6c LcLm Printer with 5Yr On-Site CoverPlus
SCF10060HF1YR 6c FyFp Printer with 1Yr On-Site CoverPlus
SCF100603HF3YR 6c FyFp Printer with 3Yr On-Site CoverPlus
SCF100605HF5YR 6c FyFp Printer with 5Yr On-Site CoverPlus
ACCESSORIES & OPTIONS
1YWF10060 1Yr 4c CoverPlus On-Site Service Pack
2YWF10060 2Yr 4c CoverPlus On-Site Service Pack
1YWF10060H 1Yr 6c CoverPlus On-Site Service Pack
2YWF10060H 2Yr 6c CoverPlus On-Site Service Pack
SERVICE & SUPPORT  

This printer is covered by a 30 day warranty that covers parts and labour. It is supplied with additional CoverPlus that extends cover to a total of 1, 3 or 5 years. Customers who need 2 or 4 year cover can purchase an additional 1 year of CoverPlus. Customers who order their printer with 1 or 3 year CoverPlus may extend cover through the purchase of one or more CoverPlus Packs within 365 days of the original installation (total cover may not exceed 5 years).

Limitations apply to the provision of Warranty and CoverPlus. Support is only provided for product supplied through Epson Australia or Epson New Zealand. The facility is provided in conjunction with the Authorised Large Format Reseller through which the product is ordered and Epson’s network of Authorised Service partners. Service will be provided on-site at no charge for equipment located in major metropolitan areas with ready access. Regional locations and installations with difficult access may receive on-site service subject to imposition of a travelling/access charge.

IMPORTANT NOTES
Epson Cloud Solution PORT is a secure cloud based service that is used to facilitate the provision of support on this model. Agreement to the terms of supply and registration under the program is required to enable fulfilment of CoverPlus. During operation the the printer must remain connected to a network with Internet access via a router configured for two way data transfer.

This model supports User Self Replacement of print heads. Operation requires Epson Cloud Solution PORT and nomination of one or more staff members to perform the process. Staff should have a moderate level of technical skill and will be required to undertake training (this can generally be performed during the installation process). In the event that staff leave employment replacements will need to be nominated and undertake training (this may attract additional charges).

Service may be restricted or limited if equipment is not installed in an appropriate environment, not appropriately maintained, be modified, used outside of specification &/or with non-Epson consumables. For further details on cover, terms and conditions please review the warranty terms listed on this web-site. If you have additional questions please contact Epson directly.

   

Usage Conditions
Epson products are designed to give highly reliable use and long life when used according to specifications. With any product or device used in situations where human life may be involved or at risk, Epson advises that you should take all necessary steps to ensure the suitability of your Epson product for inclusion in your system, and recommends that you include fail-safe procedures and redundancy support or backup equipment in your system, to maintain the maximum safety margin and optimum system reliability. Examples include but are not limited to – do not interfere with any electrical components within the device,do not use items supplied with the product for purposes other than as intended by Epson (ie mains cords, inks, CDs, plastic wrapping), do not make modifications to the product, take care with the use of 3rd party consumables, consult Epson if you have any questions or concerns.