| SIZE |
|
| Max Media Width |
76 inch (1950mm) |
| PRINT TECHNOLOGY |
| Print Head |
F10060: 4 x 4.7" Epson PrecisionCore™ TFP
F10060H: 6 x 4.7" Epson PrecisionCore™ TFP |
| Print Modes |
Uni & Bi-directional |
| Features |
Epson Precision Dot with Multi-layer Half Tone
Variable Sized Droplet Technology (VSDT)
On-board Job Connection, Step & Repeat
Integrated Media Offset & Crash Sensors
Intelligent Auto Feed Management
Ink-less Nozzle Status Monitoring
Auto Nozzle Masking & Recovery
Advanced Print Waveform
Advanced Dust control
Auto Head Alignment
Auto Head Cleaning |
| Nozzle Configuration |
800 x 4 per head/colour |
| Maximum Resolution |
1200 x 1200dpi |
| Min Droplet Size |
3.8pl |
| INK SYSTEM |
|
| Family |
Epson Ultrachrome® DS |
| Type |
Dye Sublimation |
| Colours |
F10060: CYM +HDk
F10060H: CYM +HDk + (LcLm or FyFp) |
| Supply |
DUAL Continuous Ink Supply System (CISS) with auto hot-swap |
| Refills |
Choice of 3L or 10L box type |
| PERFORMANCE |
| Fast Fabric |
300 x 600dpi*1 (1.1 Pass) |
F10060: 255m2/hr
F10060H: 246m2/hr |
| Standard Fabric |
300 x 600dpi*2 (1.5 Pass) |
F10060: 200m2/hr
F10060H: 193m2/hr |
| Fast Apparel |
600 x 600dpi*2 (2.1 Pass) |
F10060: 150m2/hr
F10060H: 144m2/hr |
| Soft Signage |
600 x 600dpi*2 (3.1 Pass) |
F10060: 103m2/hr
F10060H: 99m2/hr |
| High Quality |
600 x 1200dpi*3 (5 Pass) |
F10060: 52m2/hr
F10060H: 51m2/hr |
| Max Quality |
1200 x 1200dpi*4 (9 Pass) |
F10060: 29m2/hr
F10060H: 28m2/hr |
Figures represent print times only based on the test sample image as shown, produced 1872mm x 2340mm in multiples of 5 with no gaps using Epson Edge Print. Total throughput times for particular jobs will depend on a number of factors including PC specification, RIP application, workflow, networking, file format / size, image content, paper type and print mode.
*1300x300dpi with Two Half Tone Layers *2300x300dpi with Four Half Tone Layers
*3300x300dpi with Eight Half Tone Layers *4300x300dpi with Sixteen Half Tone Layers |
 |
| MEDIA SUPPORT |
|
| Format |
Single roll |
| Size |
300-1950mm wide, 250mm max diameter/ 60Kg max weight |
| Thickness |
0.04~1mm |
| Min Margins |
3mm left & right (7mm when using Media Holding Plates)
5mm leading & trailing edges |
| Loading |
Rear with integrated lifter, Dual front & rear platen locks |
| Media Handling |
Media pre-sets
Epson EMX profile support
Pressure reduction spacer support
Advanced Auto Tension Control (Ad-ATC)
Automatic custom media set-up via RGB camera
Selectable event and nozzle pattern check marking
Data insertion at media cut for sublimation direction |
| Output |
Sheets (manual cutting)
Roll to roll with integrated Auto Take-Up (914.4mm min roll width) |
| OPERATION |
|
| Control Panel |
9” Colour Touch LCD |
| Interface |
High Speed USB 3.0
Ethernet 1000Base-T |
| Memory |
155GB |
| Language |
ESC/P Raster |
| Included Software (Windows) |
Epson Communications Driver, EpsonNet Setup, EpsonNet Config, EpsonNet Print, Software Updater, User Guide, Manual Launcher & Video Guide |
| Web Downloads (Windows) |
Epson Edge Dashboard, LFP Accounting Tool and Edge Print Pro |
| Web Downloads (Mac) |
Epson Edge Dashboard, EpsonNet Setup, EpsonNet Config, Software Updater, Software Updater, User Guide (excerpt), Manual Launcher & Video Guide |
| Web Utility |
Epson Cloud Solution PORT (Activation requires enrolment in the program, connection of the printer to a network with Internet access and allowance for interactive data transfer.) |
| Additional Software |
Supported by a range of 3rd party applications
|
| ENVIRONMENTAL |
|
| Operational Temp |
10°~ 35° (18° ~ 28° recommended) |
| Operational Humidity |
20 ~ 80% with no condensation (40 ~ 60% recommended) |
| Power Supply |
2 x 16A, 240V, 50/60 Hz AC |
| Power Consumption |
F10060: 3.9kW Operating / 221W Sleep / 9.6W Off
F10060H: 4.4kW Operating / 230W Sleep / 9.6W Off |
| Operating Noise |
59dB |
| Dimensions (W x D x H) |
F10060: 4607 x 1303 x 1886mm, 736Kg (with CISS, no media holders or ink)
F10060H: 5008 x 1303 x 1886mm, 767Kg (with CISS, no media holders or ink)
|
| Operational Space (W x D x H) |
6.0 x 3.5 x 2.0m recommended |
| WHAT'S IN THE BOX |
|
|
Printer, Dryer, Signal Lamp, Media Supply System (MSS) with Auto Take-Up (ATU), Continuous Ink Supply System (CISS), 4/6 x 2 x 3L Ink, 4L re-usable waste bottle, 1 x Cleaning Kit, 1 x Media Cleaning Brush, 1 x Roll of Epson Multi-Purpose Transfer Media, 1 x Cleaning Kit, 1 x Head Wiper Roll, Software CD/DVD and User Guide (except).
|
|
Packaging
(W x D x H)
|
F10060 Printer: 3845 x 1135 x 1864mm, 903Kg
F10060 CISS, MSS, Dryer & ATU: 3852 x 1144 x 1331mm, 330Kg
F10060H Printer: 3845 x 1135 x 1864mm, 924Kg
F10060H CISS, MSS, Dryer & ATU: 3852 x 1144 x 1331mm, 354Kg
Media & Ink Pack (either config): 1650 x 1250 x 180mm, 50Kg
|
| SYSTEM REQUIREMENTS |
|
A Personal Computer will be required for installation and operation of this printing system. The PC should have a minimum 3Ghz multicore processor with separate GPU, 8GB memory, 250GB HDD (1TB recommended), running 64bit Windows 7/8 or OS X/10.6.8 or greater. For optimum performance it is recommended that 1000Base-T Ethernet networking be employed. A network with external Web access will be required for installation, registration and software activation. Operation of Epson Cloud Solution PORT will require that the printer be connected to a network with Internet access and a router configured for two way data exchange.
The typical operational environment for this printer will require a calendar style heat press which will need to be sourced separately. Please speak with your dealer for recommendations. |
| CONFIGURATION OPTIONS |
| SCF100601YR |
4c Printer with 1Yr On-Site CoverPlus |
| SCF100603YR |
4c Printer with 3Yr On-Site CoverPlus |
| SCF100605YR |
4c Printer with 5Yr On-Site CoverPlus |
| SCF10060HL1YR |
6c LcLm Printer with 1Yr On-Site CoverPlus |
| SCF100603HL3YR |
6c LcLm Printer with 3Yr On-Site CoverPlus |
| SCF100605HL5YR |
6c LcLm Printer with 5Yr On-Site CoverPlus |
| SCF10060HF1YR |
6c FyFp Printer with 1Yr On-Site CoverPlus |
| SCF100603HF3YR |
6c FyFp Printer with 3Yr On-Site CoverPlus |
| SCF100605HF5YR |
6c FyFp Printer with 5Yr On-Site CoverPlus |
| ACCESSORIES & OPTIONS |
| 1YWF10060 |
1Yr 4c CoverPlus On-Site Service Pack |
| 2YWF10060 |
2Yr 4c CoverPlus On-Site Service Pack |
| 1YWF10060H |
1Yr 6c CoverPlus On-Site Service Pack |
| 2YWF10060H |
2Yr 6c CoverPlus On-Site Service Pack |
| SERVICE & SUPPORT |
|
|
This printer is covered by a 30 day warranty that covers parts and labour. It is supplied with additional CoverPlus that extends cover to a total of 1, 3 or 5 years. Customers who need 2 or 4 year cover can purchase an additional 1 year of CoverPlus. Customers who order their printer with 1 or 3 year CoverPlus may extend cover through the purchase of one or more CoverPlus Packs within 365 days of the original installation (total cover may not exceed 5 years).
Limitations apply to the provision of Warranty and CoverPlus. Support is only provided for product supplied through Epson Australia or Epson New Zealand. The facility is provided in conjunction with the Authorised Large Format Reseller through which the product is ordered and Epson’s network of Authorised Service partners. Service will be provided on-site at no charge for equipment located in major metropolitan areas with ready access. Regional locations and installations with difficult access may receive on-site service subject to imposition of a travelling/access charge.
IMPORTANT NOTES
Epson Cloud Solution PORT is a secure cloud based service that is used to facilitate the provision of support on this model. Agreement to the terms of supply and registration under the program is required to enable fulfilment of CoverPlus. During operation the the printer must remain connected to a network with Internet access via a router configured for two way data transfer.
This model supports User Self Replacement of print heads. Operation requires Epson Cloud Solution PORT and nomination of one or more staff members to perform the process. Staff should have a moderate level of technical skill and will be required to undertake training (this can generally be performed during the installation process). In the event that staff leave employment replacements will need to be nominated and undertake training (this may attract additional charges).
Service may be restricted or limited if equipment is not installed in an appropriate environment, not appropriately maintained, be modified, used outside of specification &/or with non-Epson consumables. For further details on cover, terms and conditions please review the warranty terms listed on this web-site. If you have additional questions please contact Epson directly.
|
| |
|
