Epson ColorWorks C3500

ColorWorks C3500

PRINT METHOD MicroPiezo® inkjet technology, Automatic Nozzle Checking technology
INK TYPE1 Epson DURABrite™ Pigment Ink, individual CMYK cartridges
PRINT RESOLUTION 360 dpi x 360 dpi – Speed Mode
720 dpi x 360 dpi – Quality Mode
PRINT SPEED (max.) 360 dpi x 360 dpi – Banding Reduction disabled
• 103mm/sec (56mm print width)
• 85mm/sec (104mm print width)

360 dpi x 360 dpi – Banding Reduction enabled
• 95mm/sec (56mm print width)
• 78mm/sec (104mm print width)

720 dpi x 360 dpi – Banding Reduction enabled
• 52mm/sec (56mm print width)
• 42mm/sec (104mm print width)
PRINT WIDTH Max. 104mm
MEDIA TYPES Roll-fed or fanfold; die cut or continuous; single layer or adhesive labels on liner; plain paper, fine paper, PET film, synthetic, glossy
  Width 30 – 108mm (roll feed)
50 – 108mm (fan fold)
  Thickness 0.12-0.19mm (plain / matte / synthetic labels)
0.184mm (glossy label)
  Roll size Outer diameter: 102mm max.
Core diameter: 44.1mm or more (plain / matte / synthetic labels), 56.8mm or more (glossy labels)
MEDIA SENSORS Gap, black mark, media cut
  Die cut label gap 3 to 6mm
  Black mark size Width of a black mark : 13mm or more
Length of a black mark : 5mm or more
INTERFACES USB 2.0 High-speed
Ethernet 100BASE-TX / 10BASE-T
OPERATING SYSTEM Microsoft® Windows® XP 32-bit (SP3)/64-bit (SP2), Vista® 32-bit/64-bit (SP2), Windows 7 32-bit/64-bit (SP1), Windows 8 32-bit/64-bit
(Built-in driver)
Barcodes: UPC-A, UPC-E, JAN13(EAN), JAN8(EAN), Code39, ITF, Codabar, Code93, Code128, GS1-128, GS1 DataBar Omnidirectional, GS1 DataBar Truncated, GS1 DataBar Limited, GS1 DataBar Expanded
2-dimensional symbols: PDF417, QR Code, Maxi Code, GS1 DataBar Stacked, GS1 DataBar Stacked Omnidirectional, GS1 DataBar Expanded Stacked, Composite Symbology, DataMatrix, Aztec
MTBF 88,000 hours
MCBF 9.8 million lines
POWER CONSUMPTION 30W Printing (average printing)
2.5W Standby
0.3W Power Off state
EMI C-Tick Class B
MAIN UNIT DIMENSIONS 310 (W) x 283 (D) x 261 (H) mm
MAIN UNIT WEIGHT Approximately 12 kg
1 Inkjet cartridge yields vary considerably for reasons including item printed, print settings, temperature and humidity. Yields may be lower when printing infrequently. A variable amount of ink remains in the cartridge after the "replace cartridge" signal. Ink from the first cartridge is used for priming the printer. Ink is used for both printing and print head maintenance.
Epson is the registered trademark of Seiko Epson Corporation. All other names and company names used herein are for identification purpose only and may be the trademarks or registered trademarks of their respective owners. Epson disclaims any and all rights in those marks. All print samples shown herein are simulations. Specifications are subject to change without notice.

Usage Conditions
Epson products are designed and made to give highly reliable use and long life when used according to its specifications. With any system, product or device used in situations where human life may be involved or at risk, Epson advises that you should take all necessary steps to ensure the suitability of your Epson product for inclusion in your system, and recommends that you include fail-safe procedures and redundancy support or backup equipment in your system, to maintain the maximum safety margin and optimum system reliability. Examples include but are not limited to – do not interfere with any electrical components within the device, do not use items supplied with the product for purposes other than as intended by Epson (ie mains cords, inks, CDs, plastic wrapping) and do not make modifications to the product.