Epson TM-P60II Label
Mobile Printers
Rugged, Reliable and Ready to Go Mobile Printers
| PRINTER | ||
|---|---|---|
| Model Name | TM-P60II | |
| Print Method | Thermal line printing | |
| Print Font | Font A 12 x 24, new Font B 10 x 24, new Font C 8 x 16 | |
| Column Capacity (columns) | 58mm paper, Font A/B/C, 35/42/52 columns; 60mm paper, Font A/B/C, 36/43/54 columns |
|
| Character Size (mm) | 1.5 × 3.0 / 1.25 × 3.0 / 1.0 × 2.0 mm (W x H) | |
| Character Set | 95 Alphanumeric, 48 International, 128 × 10 Graphic Bar Code: : 1D: EAN-8, EAN-13, UPC-A, UPC-E, JAN13, JAN8, Code 39, Code 93, Code 128, ITF, CODEBAR, GS-1-128, GS1 DataBar, GS1 DataBar Truncated, GS1 DataBar Limited, GS1 DataBar Expanded. 2D: QR Code, Maxi Code, PDF417, Composite, Data Matrix, RSS/GS1 and Aztec |
|
| Character Per Inch | 17/20/25 cpi | |
| Print Speed | Receipt mode 100mm/sec, label mode 80mm/sec; peeler mode 40mm/sec | |
| Resolution | 203 DPI × 203 DPI | |
| Paper width | Paper or labels, 58mm or 60mm width (receipt version) Paper or labels, 30–60mm (label version) |
|
| Paper Diameter (max.) | 51mm | |
| Reliability | 10 million printing lines; 500,000 autocutter | |
| Paper Thickness (mm) possible for the manual cutter | 80μm or less | |
| GENERAL INFORMATION | ||
| Interfaces | 802.11b/g/n (2.4GHz) and 802.11a/n (5GHz) or Bluetooth 2.1 + EDR | |
| Supported mobile operating systems | WiFi (802.11): iOS, Android and Windows (Security Level WEP, WPA, WPA2-Enterprise) Bluetooth: iOS, Android and Windows |
|
| Data Buffer | 4096 bytes | |
| Autocutter | Partial cut, left uncut (receipt version) | |
| Peeler | Automatic label removal from backing (label version) | |
| Audible alert | Programmable buzzer | |
| Sensors | Paper out (receipt and label versions) Gap, black mark, label taken (label version) |
|
| LED Indicators | Green LED : Power (ON=Power on, OFF=Power off) Orange LED : Only shown when power is ON Error, Paper end, Cover open, Battery level low (printer does not operate) Blue LED : Four battery level indicators: 3 LED ON = approx. 100%–60% 2 LED ON = approx. 60%–20% 1 LED ON = approx. 20%–10% 1 LED Flashing = approx. 10%–1% |
|
| Software | TM-P60II Utility, EpsonNet Config, EpsonNet Simple Viewer, TM-P60II Remote Configuration Tool, TM Bluetooth Connector, Built-In Configuration Page | |
| Power | Custom Lithium-Ion battery pack, AC adapter (option) | |
| Battery Life | Up to 27 hours with 802.11n, up to 46 hours with Bluetooth 2.1 + EDR* | |
| Operating Temperature | 0° C to 45° C | |
| Drop rating | 4 feet (1.2m), IP54 environmental certified | |
| Overall Dimensions (mm) | 103 x 159 x 65 mm | |
| Weight (Approx) | Receipt version 630g with battery, belt clip Label version 600g with battery, belt clip |
|
| Colour | Epson Black (EBCK) | |
| Power Supply (option) | PS-11 | |
| Warranty | Standard two year RTB warranty | |
| Option | Battery (Model: OT-BY60II), Power Supply (PS-11) | |
| * The TM-P60II battery life can last up to 27 hours for WiFi and up to 46 hours for Bluetooth. Battery life can vary significantly depending on usage. | ||
| Epson is the registered trademark of Seiko Epson Corporation. Epson trademarks of Seiko Epson Corporation. All other names and company names used herein are for identification purpose only and may be the trademarks or registered trademarks of their respective owners. Epson disclaims any and all rights in those marks. All print samples shown herein are simulations. Specifications are subject to change without notice. |
Usage Conditions
Epson products are designed and made to give highly reliable use
and long life when used according to its specifications. With any system, product
or device used in situations where human life may be involved or at risk,
Epson advises that you should take all necessary steps to ensure the suitability
of your Epson product for inclusion in your system, and recommends that you
include fail-safe procedures and redundancy support or backup equipment in your system,
to maintain the maximum safety margin and optimum system reliability.