Printing method | Laser beam browse + one constituent dry electrophotographic printing |
Resolution | 600 dpi plus BiRITech (Bi-Resolution Improvement Technology) |
Printing speed | Up to 6 ppm (A4) |
Paper size | Standard paper feeder: A4, A5, B5, Letter, Half-letter, Legal, Government legal, Government letter, Executive, F4 & CustomEnvelopes: IC5, IC6, IB5, DL, Monarch and Commercial10 |
Paper feed capacity | 150 sheets (standard paper feeder) |
Feedable paper dimensions | Width: 76mm - 216mm Length: 127mm - 356mm |
Paper ejection | Face down |
Paper ejection capacity | 100 sheets |
System Requirements Host
| PC Compatible 95
|
Interfaces | Bi-directional printer cable and bi-directional parallel printer port (IEEE - 1284 compliant) (cable not included) |
Minimum System | 80386/16MHz 4 MB RAM with 8.5 MB swap file 5 MB free hard disk space VGA monitor Bi-directional Parallel Port |
Recommended System (for 600 dpi printing, your system must meet the recommended requirements above.) | 80486/25MHz 8 MB RAM with 8.5 MB swap file More than 5 MB free hard disk space VGA or better monitor ECP Parallel Port |
Memory | Standard 512 K |
Warm-up time | 35 seconds |
First print time | Less than 20 seconds (A4) |
Acoustic noise Stand-by During operation | Below 30 dB(A) Below 47 dB(A) |
Printer driver software | Printing System for Host Based Laser Printers version 1.8 PCL4 (software emulation) |
Control panel Indicator switches | Power / Data LED, Problem Indicator LED |
Durability | 5 years or 180,000 sheets, whichever comes first |
Consumables | Developer imaging cartridge 3,000 sheets at 5% coverage (A4)Photoconductor unit 20,000 sheets at 5% coverage (A4) |
Environmental conditions (operating) |
Temperature Humidity | 10° to 35° C 15% to 85% RH (no condensation) |
Electrical specifications |
Voltage Frequency Power consumption Stand-by During operation | AC 220 to 240V 50 to 60 Hz ±3 Hz
Below 15W Below 600W
|
Dimensions Width Depth Height Weight | 345 mm239 mm 214 mm Approximately 5 kg |
Warranty | 12 months |
Equipment supplied by Epson Australia is designed to function in conjunction with
genuine Epson consumables and accessories specifically configured for it.
This printer is designed to function only with genuine Epson ink cartridges and not with third party ink cartridges. The printer may not function properly or at all if you use third party ink cartridges.