Epson EB-825H

Epson EB-825H

Corporate Portable Multimedia Projectors

The Flexible Solution for Corporate & Education Environments


Overview Specs Consumables Downloads

PRODUCT TYPE Entry Level Multimedia Projectors
PRODUCT NAME Epson EB-825H
PRODUCT CODE V11H356053
PROJECTION SYSTEM RGB Liquid Crystal Shutter Projection System
PROJECTION METHOD Front / Rear / Ceiling Mount
SPECIFICATION OF MAIN PARTS
LCD Size 0.63 inches with MLA
  Driving method Poly-Silicon TFT Active Matrix
  Pixel number 786,432 pixels (1024 x 768) x 3
  Native resolution XGA
  Aspect ratio 4:3
  Pixel arrangement Stripe
  Refresh Rate 50Hz-60Hz
PROJECTION LENS Type Manual zoom / focus
  F-number 1.49 - 1.94
  Focal length 18.2mm - 29.2mm
  Zoom ratio 1.0 ~ 1.62 Digital
LAMP Type 200W UHE E-TORL
  Life (estimated) 5000Hr# (High bright), 6000Hr# (Low bright)
# Subject to operation and environmental conditions.
OPTICAL SYSTEM Dichroic Mirror Separation & Prism combine method
SCREEN SIZE (PROJECTED DISTANCE) 30 to 300 inch [0.88 to 8.7m] (Zoom: Wide)
30 to 300 inch [1.36 to 13.9m] (Zoom: Tele),
BRIGHTNESS
  High Brightness Mode 3,000 Lumens Light Output
3,000 Lumens Colour Light Output
(Colour mode: Dynamic, Zoom: Wide)
  Low Brightness Mode 2,400 Lumens Light Output
2,400 Lumens Colour Light Output
(Colour mode: Dynamic, Zoom: Wide)
CONTRAST 2000:1 (Auto Iris On)
BRIGHTNESS UNIFORMITY 90% (Typ.)
COLOUR REPRODUCTIVITY Full colour (16.77 million colours)
VIDEO QUALITY 3D Y/C separation (NTSC only), Motion compensated Interlace-Progressive conversion (3-2 film detection only)
SOUND OUTPUT 10W monaural
EFFECTIVE SCANNING FREQUENCY RANGE (ANALOG)
PIXEL CLOCK 13.5MHz to 162MHz
HORIZONTAL 15KHz to 92KHz
VERTICAL 50Hz to 117Hz
ADJUSTMENT FUNCTION
PROJECTOR / REMOTE CONTROL Brightness / Contrast / Tint / Saturation / Sharpness / Input Signal
Colour Temperature / Tracking / Position / Sharpness / Volume e.t.c.
FOOT ADJUSTER Front-centre
TILT ANGLE 0 to 11 degrees
AUTO KEYSTONE CORRECTION Vertical: -30 to +30 degrees
PASSWORD PROTECTED FUNCTION
(security function)		 Implemented
ANALOGUE RGB I/O
DISPLAY PERFORMANCE Native 1024 x 768 pixels
INPUT SIGNAL Signal type Separate signal
  Video signal Analogue (0.7V p-p, 75ohm / Mac 0.714Vp-p, 75ohm)
  Sync. signal Separate (positive & negative, bi-polarity 2-5 Vpp) / Composite (positive & negative, bi-polarity 2-5Vpp) / Sync-on-green (negative, 0.3Vpp)
  Audio signal 500mVrms / 47K-ohm
INPUT TERMINAL Video Video D-sub 15pin x 2 (Blue moulding)
  Audio Stereo mini jack x 2
OUTPUT SIGNAL Video Analog (0.7Vpp, 75ohm / Mac 0.714Vpp, 75ohm)
  Sync. Separate (positive & negative,TTL) /
Composite (positive & negative,TTL) /
Sync. on green (negative 0.2 - 0.4Vpp)
OUTPUT TERMINAL Video D-sub 15pin x 1 (Black moulding)
VIDEO I/O
DISPLAY PERFORMANCE   NTSC: 560 lines, PAL: 560 lines (Depends on observation of the multi burst pattern)
INPUT SIGNAL Video standard NTSC / NTSC4.43 / PAL / M-PAL / N-PAL / PAL60 / SECAM
  Video signal Composite Video (1.0Vpp / Sync. negative, 75ohm) /
S-Video (Luminous 0.714Vpp, Chrominous 0.286Vpp, 75ohm) /
Component Video (Analog Y level 0.75V 75ohm / Cr Cb level
+/-0.35V 75ohm / sync. negative 0.3V or 3-state+/-0.3V on Y) /
Video-RGB (0.7Vpp, 75ohm / Mac 0.714Vpp, 75ohm
  Audio signal 500mVrms / 47k-ohm
INPUT TERMINAL Video Composite Video: RCA (Yellow) x1
S-Video: Mini DIN
Component Video: D-sub 15pin x 2 (Blue moulding)
MIC
Input Signal Audio -50dBV to -40dBV (0dB=1V/Pa,1kHz) (TBD)
Input Terminal Audio Stereo mini jack
(Plug in Power IS N/A)
CONTROL I/O
SERIAL I/O Terminal D Sub 9 pin x 1
  Signal RS-232C
EASY MP
FUNCTION ESC/VP.net  
  E-mail notification  
  SNMP  
  Web control  
  PJ-Link  
  Duet  
PC FREE Message Broadcast  
  File Browser  
  Still Image JPG; Thumbnail
  Slideshow  
WIRELESS Connectivity 802.11 b/g With optional wireless adapter
SECURITY (Wireless LAN) WEP (64bit/128bit)  
  WPA-PSK (TKIP/AES)  
  WPA2-PSK(TKIP/AES)  
SOFTWARE EMP Monitor (for Windows) Epson IP Link Projector Control (for Windows)
  NS Connection For wireless connectivity (Win & Mac OSX)
OPERATING TEMPERATURE 5°C to 35°C (41°F to 95°F) > (20%-80% Humidity )
COOL-DOWN PERIOD "Instant off"
START-UP PERIOD Approx. 8.5 seconds (warm up 30 seconds)
DIRECT POWER ON Yes
DIRECT POWER OFF Yes
DIMENSION
EXCLUDE FEET 250(D) x 327(W) x 95(H) mm
MAXIMUM DIMENSION 250(D) x 327(W) x 108(H) mm
WEIGHT Approx. 3.1kg
FAN NOISE  
HIGH BRIGHTNESS MODE 35dB
LOW BRIGHTNESS MODE 28dB
WARRANTY
STANDARD WARRANTY 3 years*
*excluding lamp
* For more information visit Epson Projector Warranty Website
ACCESSORIES
POWER CORD 3m
COMPUTER CABLE 1.8m, D-sub 15pin (Male) - Mini D-sub 15pin (Male)
REMOTE CONTROL Included
PASSWORD PROTECT STICKER Included
AIR FILTER Included
OWNER'S MANUAL CD-ROM
PRODUCT OPTIONS
Product Code Item Code Description
ELPAP03 V12H306P11 Wireless LAN Adapter for G Series / EB-825/825H
ELPAP05 V12H005M05 Quick Wireless Key for EB-825/825H
  V13H010L50 Lamp
  7012083 Ceiling mount with telescopic pole
  7012084 Ceiling mount standard

Epson is the registered trademark of Seiko Epson Corporation. Epson ESC/P2 and Epson Stylus are trademarks of Seiko Epson Corporation. MicroDot is a trademark of Epson Australia Pty Limited. All other product names and other company names used herein are for identification purposes only and may be the trademarks or registered trademarks of their respective owners. Epson disclaims any and all rights in those marks. Specifications are subject to change without notice.

Equipment supplied by Epson Australia is designed to function in conjunction with genuine Epson consumables and accessories specifically configured for it.


Usage Conditions
Epson products are designed and manufactured to be highly reliable and last a long time when used according to their specifications. With any system, product or device used in situations where human life may be involved or at risk, Epson advises that you should take all necessary steps to ensure the suitability of your Epson product for inclusion in your system, and recommends that you include fail-safe procedures and redundancy support or backup equipment in your system, to maintain the maximum safety margin and optimum system reliability. Examples include but are not limited to - do not interfere with any electrical components within the device, do not use items supplied with the product for purposes other than as intended by Epson (e.g. power cords, inks, CDs, plastic wrapping) and do not make modifications to the product.