Epson EMP-X3

Epson EMP-X3

Entry Level Multimedia Projectors

High-performance and affordable Projector ideal for business and education


Overview Specs Consumables Downloads

PRODUCT TYPE Entry Level Multimedia Projectors
PRODUCT NAME Epson EMP-X3
PRODUCT CODE V11H177053
PROJECTION SYSTEM RGB Liquid Crystal Shutter Projection System
PROJECTION METHOD Front / Rear / Ceiling Mount
SPECIFICATION OF MAIN PARTS
LCD Size 0.6 inches with MLA(X3)
  Driving method Poly-Silicon TFT Active Matrix
  Pixel number 786,432 pixels (1024 x 768)
  Native resolution XGA
  Aspect ratio 4:3
  Pixel arrangement Stripe
  Refresh Rate 72Hz
PROJECTION LENS Type Manual: zoom / focus
  F-number 1.6
  Focal length 18.4mm - 22.12mm
  Zoom ratio 1.0 - 1.2
LAMP Type 170W UHE
OPTICAL SYSTEM Dichroic Mirror Separation & Prism combine method
SCREEN SIZE (PROJECTED DISTANCE) 30 to 300 inch [1.1 to 11m] (Zoom: Tele),
30 to 300 inch [0.9 to 9m] (Zoom: Wide)
KEYSTONE CORRECTION RATIO 10:1
BRIGHTNESS
  High Brightness Mode 2000 Lumens
(Colour mode: Dynamic, Zoom: Wide)
  Low Brightness Mode 1500 Lumens
(Colour mode: Dynamic, Zoom: Wide)
CONTRAST 400:1
BRIGHTNESS UNIFORMITY 85% (Typ.)
COLOUR REPRODUCTIVITY Full colour (16.77 million colours)
VIDEO QUALITY 3D Y/C separation (NTSC only), Motion compensated Interlace-Progressive conversion (3-2 film detection only)
SOUND OUTPUT 1W monaural
EFFECTIVE SCANNING FREQUENCY RANGE (ANALOG)
PIXEL CLOCK 13.5MHz to 162MHz up to UXGA 85Hz
HORIZONTAL 15KHz to 92KHz
VERTICAL 50Hz to 85Khz
ADJUSTMENT FUNCTION
PROJECTOR / REMOTE CONTROL Keystone / Brightness / Contrast / Tint / Saturation / Sound / Input signal etc.
FOOT ADJUSTER Front-center
TILT ANGLE 0 to 10 degrees (Front only:0 to 12 degrees)
KEYSTONE CORRECTION Vertical: -30 to +30 degrees (Zoom: Tele)
PASSWORD PROTECTED FUNCTION (security function) Implemented
ANALOGUE RGB I/O
DISPLAY PERFORMANCE Native 1024 x 768 pixels
INPUT SIGNAL Signal type Separate signal
  Video signal Analogue (0.75V p-p, 75ohm / Mac 0.714Vp-p, 75ohm)
  Sync. signal Separate (positive & negative, bi-polarity 2-5 Vpp) / Composite (positive & negative, bi-polarity 2-5Vpp) / Sync-on-green (negative, 0.3Vpp)
  Audio signal 500mVrms / 47Kohm
INPUT TERMINAL Video Mini D-sub 15pin x 1 Blue moulding
  Audio RCA x 2 (White/Red)
OUTPUT SIGNAL Video Analog (0.7Vpp, 75ohm / Mac 0.714Vpp, 75ohm)
  Sync. Separate (positive & negative,TTL) /
Composite (positive & negative,TTL) /
Sync. on green (negative 0.2 - 0.4Vpp)
OUTPUT TERMINAL   Video Mini D-sub 15pin x 1 (Black moulding)
VIDEO I/O
DISPLAY PERFORMANCE   NTSC: 560 line PAL: 560 line (Depends on observation of the multi burst pattern)
INPUT SIGNAL Video standard NTSC / NTSC4.43 / PAL / M-PAL / N-PAL / PAL60 / SECAM
  Video signal Composite Video (1.0Vpp / Sync. negative, 75ohm) /
S-Video (Luminous 0.714Vpp, Chrominous 0.286Vpp, 75ohm) /
Component Video (Analog Y level 0.75V 75ohm / Cr Cb level
+/-0.35V 75ohm / sync. negative 0.3V or 3-state+/-0.3V on Y) /
Video-RGB (0.7Vpp, 75ohm / Mac 0.714Vpp, 75ohm
  Audio signal 500mVrms / 47Kohm
INPUT TERMINAL Video Composite Video: RCA (Yellow) x1
S-Video: Mini DIN
Component Video: Mini D-sub 15pin Blue molding
  Audio RCA x 2 (White/Red in common with Analog RGB Audio Terminal)
CONTROL I/O
USB I/O I/O terminal USB connector series B x1 (for mouse, K/B, control)
OPERATING TEMPERATURE 5°C to 35°C (41°F to 95°F)
COOL-DOWN PERIOD "Instant Off"
START-UP PERIOD Approx. 4 seconds (warm up 30 seconds)
DIMENSION
EXCLUDE FEET 246(D) x 327(W) x 86(H) mm
MAXIMUM DIMENSION 246(D) x 327(W) x 98(H) mm
WEIGHT Approx. 2.6kg
FAN NOISE  
HIGH BRIGHTNESS MODE 36dB
LOW BRIGHTNESS MODE 30dB
WARRANTY
STANDARD WARRANTY 2 years*
*excluding lamp
* For more information visit Epson Projector Warranty Website
ACCESSORIES
POWER CORD 1.8m
COMPUTER CABLE 1.8m, Mini D-sub 15pin (Male) - Mini D-sub 15pin (Male)
REMOTE CONTROL Included
SOFT CARRYING CASE Included
PASSWORD PROTECT STICKER Included
AIR FILTER Included
Epson PROJECTOR SOFTWARE CD-ROM
OWNER'S MANUAL CD-ROM
PRODUCT OPTIONS
Product Code Item Code Description
ELP-LP34 V13H010L34 Lamp
3YWEMPX3 3YWEMPX3 3rd Year Warranty

Epson is the registered trademark of Seiko Epson Corporation. Epson ESC/P2 and Epson Stylus are trademarks of Seiko Epson Corporation. MicroDot is a trademark of Epson Australia Pty Limited. All other product names and other company names used herein are for identification purposes only and may be the trademarks or registered trademarks of their respective owners. Epson disclaims any and all rights in those marks. Specifications are subject to change without notice.


Equipment supplied by Epson Australia is designed to function in conjunction with genuine Epson consumables and accessories specifically configured for it.


Usage Conditions
Epson products are designed and manufactured to be highly reliable and last a long time when used according to their specifications. With any system, product or device used in situations where human life may be involved or at risk, Epson advises that you should take all necessary steps to ensure the suitability of your Epson product for inclusion in your system, and recommends that you include fail-safe procedures and redundancy support or backup equipment in your system, to maintain the maximum safety margin and optimum system reliability. Examples include but are not limited to - do not interfere with any electrical components within the device, do not use items supplied with the product for purposes other than as intended by Epson (e.g. power cords, inks, CDs, plastic wrapping) and do not make modifications to the product.