Epson EMP-DM1

Epson EMP-DM1

Home Theatre Projectors

Home Entertainment Made Simple!



PRODUCT TYPE Home Theatre Projector
PRODUCT NAME Epson EMP-DM1
PRODUCT CODE V11H259153
PROJECTION METHOD Front
SPECIFICATION OF MAIN PARTS
LCD Size 0.55 inches wide
  Driving method Poly-Silicon TFT Active Matrix
  Pixel number 854 x 480 pixels
  Native resolution W-VGA
  Aspect ratio 16:9
  Pixel arrangement Stripe
PROJECTION LENS Type Digital Zoom and Manual Focus
  F-number 1.44
  F-number 16.6mm
  Zoom ratio Digital Zoom
  Lens Cover Slide lens shutter (Manual)
LAMP Type 120W UHE ETOR Lamp
OPTICAL SYSTEM Dichroic Mirror Separation & Prism combine method
SCREEN SIZE (PROJECTED DISTANCE)
  30-300 inches (0.87m - 8.97m) (Wide)
  30-300 inches (1.18m - 12.11m) (Tele)
HIGH BRIGHTNESS MODE 1000 Lumens (Dynamic)
SOUND
OUTPUT Stereo Speaker
(8w x 2 / 8ohm)
MODE DVD: Concert, Drama, Action, Sci-Fi (Science Fiction)
CD : Classic, Jazz, Rock, Digital
COLOUR REPRODUCTION Full colour (16.77 million colours)
ANALOGUE RGB I/O
DISPLAY PERFORMANCE Resize 1280x1024 / 1024 x 768 / 800 x 600 / 640 x 480
VIDEO I/O
DISPLAY PERFORMANCE Input Signal Video Standard NTSC / NTSC4.43 / PAL / M-PAL / N-PAL / PAL60 / SECAM
  Input Terminal Video Composite Video:
RCA x 1
Component Video: RCA x 1
    Audio RCA x 1 (in common with Analogue RGB)
OUTPUT SIGNAL
AUDIO ANALOGUE   Head phone: 25mW / 32 ohm
AUDIO DIGITAL:   1V rms
OUTPUT TERMINAL
AUDIO ANALOGUE   Headphone : Stereo jack (3.5mm)
AUDIO DIGITAL   RCA x 1
DVD UNIT
LOADING   Slot
MEDIA   DVD Video (Zone 4), VCD, SVCD, Audio CD, MP3(CD/DVD), WMA(CD/DVD), JPEG ,DivX(CD/DVD) ,DivX Ultra(CD/DVD), Dual Disk, DVD-R/RW, DVD+R/RW, DVD-ROM, CD-R/R, CD-ROM, DVD-VR(w/wo CPRM)
AUDIO FORMAT   Dolby Digital, DTS, MP3, ,MPEG-2, LPCM
FUNCTION   DVD Player, Playing from USB flash drive or USB memory card reader, etc
CONTROL I/O
USB I/O   USB Type A ( for Photo Viewer )
SERIAL I/O   D-sub 9pin x 1
KEYSTONE CORRECTION   Vertical: -15 to +15 degrees
OPERATING TEMPERATURE
  5°C to 35°C (41°F to 95°F) (20% to 80% Humidity)
Thermal shut down > 45 °CC
  Cool-down period Instant Off
  Start-up period Approx: 4 seconds
POWER SUPPLY VOLTAGE 100-240 VAC ±10%, 50/60Hz
DIMENSIONS
EXCLUDING FEET 320mm(W) x 230mm(D) x 127mm(H)
MAXIMUM DIMENSION 320mm(W) x 230mm(D) x 135mm(H)
WEIGHT Approx. 3.8kg
FAN NOISE
  High Brightness Mode 29dB
ACCESSORIES
POWER CORD 3.0m
CARRY CASE Included
REMOTE CONTROL Stick type
USER MANUALS Included
BATTERY AA x 2
WARRANTY* 2 years
* excluding lamp  
* For more information visit Epson Projector Warranty

Product Options

Product Code Item Code Description
ELP-LP44 V13H010L44 E-TORL Lamp

Epson is the registered trademark of Seiko Epson Corporation. Epson ESC/P2 and Epson Stylus are rademarks of Seiko Epson Corporation. MicroDot is a trademark of Epson Australia Pty Limited. All other product names and other company names used herein are for identification purposes only and may be the trademarks or registered trademarks of their respective owners. Epson disclaims any and all rights in those marks. Specifications are subject to change without notice.


Equipment supplied by Epson Australia is designed to function in conjunction with genuine Epson consumables and accessories specifically configured for it.


Usage Conditions
Epson products are designed and manufactured to be highly reliable and last a long time when used according to their specifications. With any system, product or device used in situations where human life may be involved or at risk, Epson advises that you should take all necessary steps to ensure the suitability of your Epson product for inclusion in your system, and recommends that you include fail-safe procedures and redundancy support or backup equipment in your system, to maintain the maximum safety margin and optimum system reliability. Examples include but are not limited to - do not interfere with any electrical components within the device, do not use items supplied with the product for purposes other than as intended by Epson (e.g. power cords, inks, CDs, plastic wrapping) and do not make modifications to the product.