Epson EMP-TW10

Epson EMP-TW10

Home Theatre Projectors

High performance, home cinema Projector.



PROJECTION SYSTEM
  D3 Liquid Crystal Display
PROJECTION METHOD
  Front / Rear / Ceiling Mount
SPECIFICATION OF MAIN PARTS
LCD
Size 0.55" wide
Driving method Poly-silicon TFT Active Matrix
Pixel number 854 x 480 pixels
Native Resolution 480P
Aspect ratio 16:9
Pixel Arrangement Stripe
Refresh Rate ~72Hz
Projection Lens
Type Manual: zoom / focus
F-number 1.7 - 2.1
focus length 13.9 - 21.4mm
Zoom ratio 1 - 1.54
Lamp
Type 132W UHE Lamp
Life 3000H (Color mode: Theatre Black Only) 2000H (Color mode: Theatre / Living Room / Dynamic)
OPTICAL SYSTEM
  Dichroic Mirror Separation & Prism combine Method
SCREEN SIZE (PROJECTED DISTANCE)
  30-300 inches (0.73-7.58 m) (Wide) 30-300 inches (1.14-11.65 m) (Tele)
OFFSET
  10:0
KEYSTONE CORRECTION RATIO
  7.3:-1
BRIGHTNESS
 Brightness Mode Up to 1000 lm
CONTRAST
  700 : 1
BRIGHTNESS UNIFORMITY
  90% (Typ.)
COLOUR REPRODUCTION
  Full Colour (16.77million colours)
ADJUSTMENT FUNCTION
Projector / Remote Control Keystone (Vertical) / Brightness / Contrast / Tint / Saturation / Sound / Input signal etc.
Tilt Angle 0 to 10 degrees
Keystone Correction Vertical: -15 to +15 degrees
Cinema Filter Controlled automatically with colour mode (ON: Theatre / Theatre Black, OFF: Living Room / Dynamic)
ANALOG RGB I/O
Display Performance
Resize 1024 x 768 / 800 x 600 / 640 x 480
Input Signal
Signal type Separate signal
Video Signal Analog (0.7V p-p,75 ohm / Mac0.714Vp-p, 75ohm)
Sync. Signal Separate (positive & negative, bi-polarity 2-5Vpp) /
Composite (positive & negative, bi-polarity 2-5Vpp) /
Sync-on-green (negative, 0.3Vpp) /
CVBS (1.0Vpp / Sync.negative, 75ohm)
Input Terminal
Video Mini D-sub 15pin x1 Blue-molding
RCA x 4 (Red / Green / Blue / Yellow) (in common with Component Video and Composite Video terminal)
Audio RCA x 2 (White / Red)
VIDEO I/O
Composite / S Input
Display Performance NTSC: 480 lines PAL: 480 lines (Depend on observation of the multi burst pattern)
Input Signal
Video Standard NTSC / NTSC4.43 / PAL / M-PAL / N-PAL / PAL60 / SECAM
Video signal Composite Video (1.0Vpp / Sync.negative, 75 ohm) /
S-Video (Luminous 0.714Vpp, Chrominous 0.286Vpp, 75 ohm)
Input Terminal
Video Composite Video: RCA (Yellow) x 1
S-Video: Mini DIN
Audio RCA x 2 (in common with Analog RGB)
Component Input
Display Performance 525i : 480 Lines, 625i : 480 Lines (Depend on observation of the multi burst pattern)
Input Signal
Video Standard 525i / 625i / 525P / 625P YCbCr 750P / 1125i YPbPr
Video signal Component Video (Analog Y level 0.7V 75 ohm / Cr Cb level +/-0.35V 75 ohm / sync. negative 0.3V or 3-state +/-0.3V on Y)
Input Terminal
Video RCA x 3 (Red / Green / Blue)
Audio RCA x 2 (in common with Analog RGB)
CONTROL I/O
Serial I/O
I/O terminal Mini D-sub 9pin x1
I/O signal RS-232C
CHILD-LOCK
  Built-in
OPERATING TEMPERATURE
  5°C to 35°C <41°F to 95°F> (20% to 80% Humidity)
POWER SUPPLY VOLTAGE
  100-240 V (AC) ±10%, 50/60Hz
POWER CONSUMPTION
  100-240 V (AC) 50/60Hz 2.3 - 1.0A
DIMENSION
Exclude Feet 402(W) x 114(H) x 294(D) mm
Maximum dimension 349(W) x 122(H) x 276(D) mm
WEIGHT APPROX.
  7.9 lbs / 3.6 Kg
FAN NOISE
Normal Mode 35dB (Dynamic / Living Room / Theatre)
Silent Mode 29dB (Theatre Black)
ACCESSORIES Power cord (1.8m)
Remote Control
Battery (Lithium CR2025)
Rubber Stand
User's manual
Quick Reference Card
Safety Instructions
PRODUCT CODE
  V11H127053

Product Options

Product Code Item Code Description
ELP-KS51 V12H001K51 Soft Carry Case
ELP-LP25H V13H010L2H Lamp
7010859 7010859 Ceiling Mount
ELP-KC19 V12H005C19 15Pin to Component Video
3YWTW10 3YWTW10 3rd Year Warranty

Epson is the registered trademark of Seiko Epson Corporation. Epson ESC/P2 and Epson Stylus are trademarks of Seiko Epson Corporation. MicroDot is a trademark of Epson Australia Pty Limited. All other product names and other company names used herein are for identification purposes only and may be the trademarks or registered trademarks of their respective owners. Epson disclaims any and all rights in those marks. Specifications are subject to change without notice.


Equipment supplied by Epson Australia is designed to function in conjunction with genuine Epson consumables and accessories specifically configured for it.


Usage Conditions
Epson products are designed and manufactured to be highly reliable and last a long time when used according to their specifications. With any system, product or device used in situations where human life may be involved or at risk, Epson advises that you should take all necessary steps to ensure the suitability of your Epson product for inclusion in your system, and recommends that you include fail-safe procedures and redundancy support or backup equipment in your system, to maintain the maximum safety margin and optimum system reliability. Examples include but are not limited to - do not interfere with any electrical components within the device, do not use items supplied with the product for purposes other than as intended by Epson (e.g. power cords, inks, CDs, plastic wrapping) and do not make modifications to the product.