Epson EMP-TW200

Epson EMP-TW200

Home Theatre Projectors

Stunning picture quality for a breath-taking cinema experience.


Overview Specs Consumables Downloads

PRODUCT TYPE Home Theatre Projectors
PRODUCT CODE V11H138053
PROJECTION SYSTEM D4 Liquid Crystal Display
PROJECTION METHOD Front / Rear / Ceiling Mount
SPECIFICATION OF MAIN PARTS
LCD Size 0.7 inches wide
  Driving method Poly-Silicon TFT Active Matrix
  Pixel number 1280 x 720 pixels
  Native resolution 720P
  Aspect ratio 16:9
  Pixel arrangement Stripe
PROJECTION LENS Type Powered: zoom / focus
  F-number 2.1-2.8
  Focus length 21.4-31.7mm
  Zoom ratio 1.0:1.5
LAMP Type 200 W UHE
SCREEN SIZE (PROJECTED DISTANCE) 30 to 300 inch (0.87 to 9.11m) (Wide)
30 to 300 inch (1.33 to 13.65m) (Tele)
LENS SHIFT RANGE Vertical: 100% max. (upward), 50% max.(downward)
Horizontal: 50% max. (Left and Right)
BRIGHTNESS
High Brightness Mode 1300 lm (Colour mode: Living Room / Dynamic)
Low Brightness Mode 500 lm (Theatre, Natural, sRGB)
CONTRAST 1000:1
BRIGHTNESS UNIFORMITY 90% (Typ.)
COLOUR REPRODUCTIVITY Full colour (16.77 million colours)
EFFECTIVE SCANNING FREQUENCY RANGE
PIXEL CLOCK 13.5MHz to 110MHz
HORIZONTAL 15 to 92 KHz
VERTICAL 50 to 85 Hz
ADJUSTMENT FUNCTION
TILT ANGLE 0 to 3.6 degrees
KEYSTONE CORRECTION Vertical: -15 to +15 degrees
CINEMA FILTER Controlled automatically with colour mode
(ON: Theatre / Natural / s-RGB, OFF: Living Room / Dynamic)
ANALOGUE RGB I/O
DISPLAY PERFORMANCE Native 750P
  Resize 1280 x 1024 / 1024 x 768 / 800 x 600 / 640 x 480 / 525i / 625i / 525P / 625P / 1125i
INPUT SIGNAL Signal type Separate signal
  Video signal Analogue (0.7 p-p, 75 ohm / Mac 0.714Vp-p, 75ohm)
  Sync. signal Separate (positive & negative, bi-polarity 2-5Vpp) / Composite (positive & negative, bi-polarity 2-5Vpp) / Sync-on-green (negative, 0.3Vpp)
INPUT TERMINAL Video Mini D-sub 15 pin x 1 Blue molding
VIDEO I/O
COMPONENT INPUT
INPUT SIGNAL Video standard 525i / 625i / 525P / 625P / 750P / 1125i
  Video signal Component Video (Analog Y level 0.7V 75 ohm / Cr Cb level +/-0.35V 75 ohm / sync. negative 0.3V or 3-state +/-0.3V on Y)
INPUT TERMINAL   RCA x 3 (Red / Green / Blue )
COMPOSITE / S VIDEO
INPUT SIGNAL Video standard NTSC / NTSC4.43 / PAL / M-PAL / N-PAL / PAL60 / SECAM
  Video signal Composite Video (1.0Vpp / Sync. negative, 75 ohm) /
S-Video (Luminous 0.714Vpp, Chrominous 0.286Vpp, 75 ohm)
INPUT TERMINAL S-Video Mini DIN 4pin
USB type B
  Video RCA (Yellow) x 1
CONTROL I/O
SERIAL I/O I/O terminal Mini D-sub 9-pin x 1
  I/O signal RS-232C
LOCK FUNCTION Key-lock, Child-lock, Focus-lock, Zoom-lock
OPERATING TEMPERATURE 5°C to 35°C (41°F to 95°F) (20% to 80% Humidity)
COOL-DOWN PERIOD approx 30 seconds
START-UP PERIOD approx 15 seconds
POWER SUPPLY VOLTAGE 100-240 VAC ±10% , 50/60Hz
POWER CONSUMPTION 100-240 VAC 50/60Hz 3.0 - 1.4A
DIMENSIONS
EXCLUDE FEET 440mm(W) x 320mm(D) x 114mm(H)
MAXIMUM DIMENSION 440mm(W) x 320mm(D) x 134mm(H)
WEIGHT Approx. 11.8lbs / 5.3kg
FAN NOISE
HIGH BRIGHTNESS MODE 37dB (Dynamic / Living Room)
WHISPER MODE 28dB (Theatre / Natural / s-RGB)
ACCESSORIES
POWER CORD 3m
REMOTE CONTROL Stick type (back lit)
BATTERY LR6 <AA> x2
USB CABLE Included 1.8m
Epson CINEMA COLOR EDITOR CD Rom (Win/Mac)
USER'S MANUAL Included
QUICK REFERENCE CARD Included
SAFETY INSTRUCTIONS Included
LENS CAP Included
WARRANTY* 2 years
* excluding lamp  
* For more information visit http://www.epson.com.au/warranty/projector.asp?fromnav=8

Product Options

Product Code Item Code Description
ELP-KS51 V12H001K51 Soft Carry Case
ELP-LP28 V13H010L28 Lamp
7011342 7011342 Ceiling Mount with extendable pole (up to 110mm)
3YWTW200 3YWTW200 3rd Year Warranty
Epson is the registered trademark of Seiko Epson Corporation. Epson ESC/P2 and Epson Stylus are trademarks of Seiko Epson Corporation. MicroDot is a trademark of Epson Australia Pty Limited. All other product names and other company names used herein are for identification purposes only and may be the trademarks or registered trademarks of their respective owners. Epson disclaims any and all rights in those marks. Specifications are subject to change without notice

Equipment supplied by Epson Australia is designed to function in conjunction with genuine Epson consumables and accessories specifically configured for it.


Usage Conditions
Epson products are designed and manufactured to be highly reliable and last a long time when used according to their specifications. With any system, product or device used in situations where human life may be involved or at risk, Epson advises that you should take all necessary steps to ensure the suitability of your Epson product for inclusion in your system, and recommends that you include fail-safe procedures and redundancy support or backup equipment in your system, to maintain the maximum safety margin and optimum system reliability. Examples include but are not limited to - do not interfere with any electrical components within the device, do not use items supplied with the product for purposes other than as intended by Epson (e.g. power cords, inks, CDs, plastic wrapping) and do not make modifications to the product.