Back to Base Warranty

Epson Australia Express Warranty

Australian Consumer Law Prescribed Statement
Our Products come with guarantees that cannot be excluded under the Australian Consumer Law (“ACL”). You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the Products repaired or replaced if they fail to be of acceptable quality and the failure does not amount to a major failure.

This Express Warranty is in addition to other rights or remedies that You may have under the ACL in relation to your Product.

In this Express Warranty:

  1. “ACL” means the Competition and Consumer Act 2010 and Regulations.
  2. “Back to Base” is where you deliver your Product to and collect it from a Service Agent.
  3. “Consumable” includes (without limitation) ink cartridges, toner cartridges, paper, waste pads and lamps.
  4. “Epson Australia” means Epson Australia Pty Ltd ABN 91 002 625 783.
  5. "Quality Refurbished Product" means a refurbished product that's unused or had very little use, except for checking and quality verification by Epson's own service department to ensure it performs properly. These products are sold by Epson Australia, and were previously referred to as a Factory Second.
  6. “Genuine” means manufactured by or for a member of the Seiko-Epson group of companies.
  7. “Hours” means the number of hours for which a Product or a Lamp is used, as recorded by the counter within the Product.
  8. “Lamp” means a projector lamp whether supplied in a Product or subsequently purchased from Epson Australia or a Stockist.
  9. “Product” means a Genuine Product projector (but excluding the Lamp) sold new by Epson Australia.
  10. “Marketing Initiative” includes any competition or promotion initiated by Epson Australia relating to a Product.
  11. “Purchase Date” means the date of first purchase of a Product from Epson Australia or a Stockist.
  12. “Specifications” means the performance characteristics of a Product set out from time to time on Epson Australia’s website.
  13. “Stockist” means a dealer, reseller or retailer of a Product.
  14. “Service Agent” means a person or company authorised by Epson Australia to provide Express Warranty service on a Product.
  15. “You” means the End User and “your” has a corresponding meaning.

Express Warranty Terms
Epson Australia offers a Back to Base Warranty on your Product subject to the following conditions.

Epson Australia warrants that your Product will be free from any defect in materials or workmanship for the periods set out in the following tables:

Projector Warranty Period
(Excluding Lamp)
Lamp Warranty
(When supplied new with Projector)
3 Years or 15,000 hours**
12 Months or 750 hours**

Lamp Model Codes
Lamp Warranty
(When purchased separately from a Product)
Codes ending L46 or above
12 months or 750Hrs**
Codes ending L45 or below
3 months or 500Hrs**
3D Home Cinema Glasses
12 months

** Whichever comes first

24 Hour Use
Please note that if the projector is operated continuously for up to 24 hours a day, Epson will warrant the projector for a maximum of 15,000 hours subject to the following conditions:

  1. The air filter is inspected at regular intervals, and replaced when necessary;
  2. The projector is operated in a well-ventilated and relatively dust free environment where the ambient temperature and humidity levels are within the limits specified in the User Guide.

Quality Refurbished Product Warranty
Regardless of anything stated in the table, a Quality Refurbished Product listed in the table above will be covered by this warranty for six (6) months warranty from its Purchase Date.

At its discretion, Epson Australia will either repair or replace your Product, if it is found on inspection by Epson or a Service Agent to have any such defect within the relevant warranty period.

A Stockist who sells a Product to you has no authority from Epson Australia to give you any additional warranty or guarantee in relation to your Product or to make any statement other than what is contained in the Specifications) about:

  1. a Product’s performance or fitness for any specific purpose; or
  2. the currency or application of any Marketing Initiative.

Epson Australia will not be liable for any consequential loss or damage claimed to arise from your use of the Product. In particular (but without limitation) Epson Australia will not be liable for actual or expected revenue loss or for any corruption or loss of data claimed to arise from your use of the Product.

Express Warranty Claim Procedure
If you wish to make a claim under this Express Warranty, you must do the following:

  • Call Epson Australia’s Contact Centre on 1300 361 054 to notify them of your claim;
  • Return the Product, as far as possible in its original packaging, to a Service Agent, whose location will be advised by Epson Australia’s Contact Centre; and
  • Provide a copy of your purchase receipt, or other reasonably acceptable evidence of your Purchase Date, to show that this Express Warranty applies to your Product at the date of your claim.

You will be required to pay the cost of delivering your Product to and collecting your Product from Epson Australia (or a Service Agent) for Express Warranty service.

Express Warranty Application
This Express Warranty applies only:

  1. To a Product sold by Epson Australia or by a Stockist; and
  2. You have not bought the Product for resale.

Express Warranty Exclusions
This Express Warranty will not apply if any of the following events occurs in relation to your Product during the applicable warranty period stated above:

  1. A Product’s serial number or any rating label is removed or changed in any way;
  2. A Product is found to have been used in an excessively dusty environment;
  3. A Product is serviced or repaired by anyone other than a Service Agent;
  4. You use a Product contrary to any recommended, technical, operating, handling or storage guidelines in its user guide;
  5. A product is found to have been used outdoors; or
  6. A Product’s malfunction or failure to perform according to Epson Australia’s specifications results from:
  1. deliberate or accidental damage;
  2. neglect or modification by or on behalf of an End User;
  3. the use of incorrect voltage or a power surge; or
  4. the use of non-Genuine Consumables, software, replacement parts or accessories.

Terms & Conditions (G & Z series On-Site)

  • A customer purchasing this service pack will receive a next business day on-site repair service for a total period of 5 years starting from the date of purchase of actual product;
  • A next business day on-site service can only be provided on business days and if Epson is notified about the problem before 11:00am;
  • To make a claim under this service pack, the end-user must contact the Epson Call Centre;
  • On-Site service will be provided once the Epson Call Centre has determined that there is a hardware failure with the projector;
  • This service pack covers Optical Engine failures;
  • The on-site service will include 1 (one) “event” per year: 1 event = filter & lamp replacements
  • The event will only be actioned should the projector experience a hardware failure requiring On-site service and is more than 6 months of age;
  • A maximum of 5 events for the duration of the 5 year service pack with only one event claimable per year will be allowed – regardless of the number of failures. Warrant-able hardware failures as determined by Epson that fall under the standard warranty terms and conditions will not be capped;
  • Events not used in the current year do not roll over to the following years of the service pack;
  • Lamps reaching end of life will not be considered as a failure and in such cases lamp replacements will be at the end-users expense;
  • Authorised Service agents will remove/re-install the projector;
  • Some repairs may not be possible On-Site and the Authorised Service Agent may be required to service the projector back at their workshop;
  • The price above does not include cost for scaffolding hire /assembly, pickers or room modifications that may be needed to access the projector;
  • Optical engine maintenance e.g. dust ingress will be at customer expense and cannot be conducted on-site; will need to be done at the Authorised Service Agents workshop;
  • On-site service will only be available within 50 km of an Authorised Service Agent from the following locations: Sydney CBD, Melbourne CBD, Adelaide CBD, Perth CBD, Brisbane CBD, Hobart CBD;
  • The Authorised Service agent will remove and re-install a projector from its mount provided the following conditions are met:
    • The ceiling height is no more than 2.7 meters (max);
    • The surface directly beneath the projector is 100% flat, stable and clean;
    • An area of 9 square meters directly beneath the projector will need to be free of any obstacles, obstructions & be clean;
    • Removal of any obstacles, permanent or otherwise will need to be removed by end-user at customer expense & responsibility.

  • Should the conditions above not be met, the Authorised Service Agent will not be permitted to attempt projector removal. The removal of the unit and associated costs will revert back to the end-user.

G & Z Series On-Site Warranty Claim Procedure

  • Call the Epson support centre at 1300 361 054;
  • Customer will be asked to provide the products serial number and Service Pack ID. These details need to be on hand at the time of the call;
  • Detailed fault description will be discussed with the Call Centre Agent;
  • Call Centre Agent will assess the reported problem;
  • Call may be escalated to a higher tier of support for further assessment;
  • Should it be determined that an On-Site repair is required, an Authorised Service Agent will get in touch with the customer;
  • The Authorised Service Agent with customer’s permission will visit the premises next business day or at a more suitable and convenient time should next day not be possible, to resolve the issue;
  • Please Note: In some instances, Epson will require time to investigate the reported problem further which will delay the next business day On-Site service. This is aimed at minimising any disruption to customer’s business and to ensure an efficient and effective service is delivered.

Non-Genuine Items
If you use non-Genuine Lamps, software, replacement parts or accessories in or with your Product during the relevant warranty period, you may damage the Product and may consequently invalidate this Express Warranty.

Note to this Warranty
During projection, some points (dots) may appear lit at all times, or they may be dark at all times. This is caused by the characteristics of the LCD panel, and is not a sign of a malfunction. The LCD panel is manufactured using extremely high-precision technology. However, black dots may appear on the panel, or some red, blue or green dots may light extremely brightly at times. Furthermore, sometimes stripe-shaped colour irregularities or brightness irregularities may also appear also appear, which is also not a sign of malfunction.

Technical Support
For Software Drivers, User or Product Manuals, Installation or Setup Guides, How-to-Videos, MSDS Bulletins and other support information visit

Phone Technical Support:-  1300 361 054

Details of the Company giving this Express Warranty:
Epson Australia Pty Ltd
3 Talavera Road
North Ryde NSW 2113
1300 361 054

New Zealand customers please refer to