Epson EH-TW4500

Epson EH-TW4500

Home Theatre Projectors

The Outstanding High Definition Projector for Home Theatre Enthusiasts



PRODUCT TYPE
Home Theatre Projectors
PRODUCT NAME
Epson EH-TW4500
PRODUCT CODE
V11H337353
PROJECTION SYSTEM
RGB Liquid Crystal Display
PROJECTION METHOD
Front / Rear / Ceiling Mount
SPECIFICATION OF MAIN PARTS
LCD
Size 0.74 inches wide D7 panel with MLA
Driving method Poly-Silicon TFT Active Matrix
Native resolution 1080P Full HD (1920 x 1080)
Pixel number 2073600 pixels (1920 x 1080 pixels) x 3
Aspect ratio 16:9
Pixel arrangement Stripe
Refresh Rate 100Hz or 120Hz (based on input signal)
PROJECTION LENS
Type manual: zoom / focus
F-number 2.0 - 3.17
Focus length 22.5 - 47.2mm
Zoom ratio 1:2.1
LAMP
Type 200 W UHE E-TORL Lamp
SCREEN SIZE (PROJECTED DISTANCE)
30 to 300 inch (0.87m to 9.03m) (Wide)
30 to 300 inch (1.88m to 19.15m) (Tele)
LENS SHIFT RANGE
Vertical: 96.3% max. (upward & downwards)
Horizontal: 47.1% max. (Left and Right)
BRIGHTNESS
Normal Mode 1,600 Lumens Light Output
1,600 Lumens Colour Light Output
  Colour Mode ( Dynamic, Zoom: Wide, Lens shift: V5.5 / H Centre )
*For further information on Colour Light Output click here
CONTRAST
200,000:1 ( Colour Mode: Dynamic, Zoom: Wide, Lens shift: : V10 / H Centre , Auto iris: On )
COLOUR PROCESSING
Full 10 bit
COLOUR REPRODUCTIVITY
Full Colour (1.07 Billion Colours)
COLOUR SPACE
115% of NTSC
VIDEO QUALITY
Interlace - Progressive conversion 3D Y/C separation, Noise reduction, Mosquito NR, Block NR
EFFECTIVE SCANNING FREQUENCY RANGE (Digital)
PIXEL CLOCK 13.5MHz to 150MHz
HORIZONTAL 15 to 80KHz
VERTICAL 24, 50 to 85Hz
ADJUSTMENT FUNCTION
PROJECTOR / REMOTE CONTROL Brightness / Contrast / Tint / Saturation / Input signal etc.
TILT ANGLE 0 to 8.0 degrees
CONTRAST ENHANCEMENT 1 / 2 / 3 / Off
SUPER-RESOLUTION 1 / 2 / 3 / Off

COLOUR MODE

Dynamic, Living Room, Natural, Theatre, Theatre Black 1, Theatre Black 2, x.v. Color
EPSON CINEMA FILTER

Controlled automatically with colour mode
(ON: Natural / Theatre / Theatre Black 1 / Theatre Black 2 / x.v.Color,  OFF: Dynamic / Living room)

AUTO IRIS Controlled automatically adjusting to video source. (Available at all colour modes except x.v.Color; user selectable Off/Normal/Fast on OSD)
EPSON SUPER WHITE

Controlled automatically adjusting to video source (Available at Natural/Theatre/Theatre Black 1 and 2; user selectable ON/OFF on OSD)

4:4 Pull Down (1080p/24p, 1080/60i, or 480i capability)

On/Off, convert 3:2 pull down signal to 4:4 pull down (Default on:1080/24p, Default off:1080/60i or 480i, HDMI & Component Input)

ASPECT MODE
Auto / Normal / Full / Zoom / Wide
ANALOGUE RGB I/O
DISPLAY PERFORMANCE Native 1080p
  Resize 1280 x 1024 / 1360 x 768 / 1024 x 768 / 800 x 600 / 640 x 480
INPUT SIGNAL Signal type Separate signal
  Video signal Analog (0.7V p-p,75 ohm/ Mac0.714Vp-p, 75ohm)
  Sync.signal Separate (positive & negative, bi-polarity 2-5Vpp) / Composite (positive & negative, bi-polarity 2-5Vpp) / Sync-on-green (negative, 0.3Vpp)
INPUT TERMINAL Video Mini D-sub 15 pin x 1 Blue molding
HDMI Ver.1.3
DISPLAY PERFORMANCE Native 1080p
  Video standard 480i / 576i / 480p / 576p / 720p / 1080i / 1080p
  Video signal TMDS ( Signal for HDMI)
  Input Terminal HDMI x 2 (HDCP)
VIDEO I/O
COMPONENT INPUT
INPUT SIGNAL Video standard 480i / 576i / 480p / 576p / 720p / 1080i / 1080p
  Video signal Component Video (Analog Y level 0.7V 75 ohm / Cr Cb level +/-0.35V 75 ohm / sync. negative 0.3V or 3-state +/-0.3V on Y)
INPUT TERMINAL   RCA x 3 (Red / Green / Blue)
COMPOSITE / S VIDEO
INPUT SIGNAL Video standard NTSC / NTSC4.43 / PAL / M-PAL / N-PAL / PAL60 / SECAM
  Video signal Composite Video (1.0Vpp / Sync.negative, 75 ohm) / S-Video (Luminous 0.714Vpp, Chrominous 0.286Vpp, 75 ohm)
INPUT TERMINAL S-Video Mini DIN x1
  Composite Video RCA (Yellow) x 1
CONTROL I/O
SERIAL I/O I/O terminal D-sub 9 pin x 1
  I/O signal RS-232c
TRIGGER OUT

Output terminal

3.5 mm mini-jack x 1
  Output Signal Power on: 12v DC, 200mA max Power off: 0v
LOCK FUNCTION Operation Lock & child-lock
OPERATING TEMPERATURE 5°C to 35 °C (41°F to 95 °F) at 20% ~ 80% Humidity
DIRECT POWER ON Yes
COOL-DOWN PERIOD Approx 16 seconds
POWER SUPPLY VOLTAGE 100-240 VAC ±10%, 50/60Hz
POWER CONSUMPTION 284W (Lamp High)
DIMENSIONS
EXCLUDE FEET 450mm(W) x 360mm(D) x 136mm(H)
MAXIMUM DIMENSION 450mm(W) x 390mm(D) x 145mm(H)
WEIGHT Approx. 7.5 kg
FAN NOISE  
HIGH BRIGHTNESS MODE 28dB (Colour mode: Dynamic)
WHISPER MODE 22dB (Colour mode: Theatre Black 1 and 2)
ACCESSORIES
POWER CORD 3m
REMOTE CONTROL Stick type (backlight)
BATTERY Alkaline, AA x2 (Included)
USER'S MANUAL Included (CD-Rom)
LENS CAP Included
WARRANTY* 2 years
* For more information visit Epson Projector Warranty
PRODUCT OPTIONS
Product Code Item Code Description
V13H010L49 V13H010L49 Lamp
Epson is the registered trademark of Seiko Epson Corporation. Epson ESC/P2 and Epson Stylus are trademarks of Seiko Epson Corporation. MicroDot is a trademark of Epson Australia Pty Limited. All other product names and other company names used herein are for identification purposes only and may be the trademarks or registered trademarks of their respective owners. Epson disclaims any and all rights in those marks. Specifications are subject to change without notice.

Equipment supplied by Epson Australia is designed to function in conjunction with genuine Epson consumables and accessories specifically configured for it.


Usage Conditions
Epson products are designed and made to give highly reliable use and long life when used according to its specifications. With any system, product or device used in situations where human life may be involved or at risk, Epson advises that you should take all necessary steps to ensure the suitability of your Epson product for inclusion in your system, and recommends that you include fail-safe procedures and redundancy support or backup equipment in your system, to maintain the maximum safety margin and optimum system reliability. Examples include but are not limited to – do not interfere with any electrical components within the device, do not use items supplied with the product for purposes other than as intended by Epson (ie mains cords, inks, CDs, plastic wrapping) and do not make modifications to the product.