Epson EB-460

Epson EB-460

Ultra Short Throw Projectors

Ultra Short Throw From the World?s Number 1 Projector Manufacturer



PRODUCT TYPE Entry Level Multimedia Projectors
PRODUCT NAME Epson EB-460
PRODUCT CODE V11H343053
PROJECTION SYSTEM RGB Liquid Crystal Shutter Projection System
PROJECTION METHOD Ceiling Mount Front / Ceiling Mount Rear
SPECIFICATION OF MAIN PARTS
LCD Size 0.63 inches with MLA
  Driving method Poly-Silicon TFT Active Matrix
  Pixel number 786,432 pixels (1024 x 768) x 3
  Native resolution XGA
  Aspect ratio 4:3
  Pixel arrangement Stripe
  Refresh Rate 50Hz-60Hz
PROJECTION LENS Type Digital zoom / Manual focus
  F-number 1.8
  Focal length 4.68mm
  Zoom ratio 1.0 - 1.35 (Digital)
LAMP Type 230W UHE E-TORL
  Life (estimated) 2500Hr (Normal Mode) # 3500Hr (ECO Mode) #

#Subject to operation & environmental conditions.
OPTICAL SYSTEM Dichroic Mirror Separation & Prism combine method
SCREEN SIZE (PROJECTED DISTANCE) 63 to 102 inch [0.465 to 0.766 m]
BRIGHTNESS
  Normal Mode 3,000 Lumens Light Output
3,000 Lumens Colour Light Output
(Colour mode: Dynamic, Zoom, Wide)
  ECO Mode 2,080 Lumens Light Output
2,080 Lumens Colour Light Output
(Colour mode: Dynamic, Zoom, Wide)
CONTRAST 2,000:1 (Color mode: Dynamic, High brightness mode, Zoom: Wide, Auto iris: On)
BRIGHTNESS UNIFORMITY 90% (Typ.)
COLOUR REPRODUCTIVITY Full colour (16.77 million colours)
VIDEO QUALITY 3D Y/C separation ,Noise Reduction Motion compensated Interlace-Progressive conversion (2-2,3-2 film detection)
SOUND OUTPUT 10W monaural
EFFECTIVE SCANNING FREQUENCY RANGE (ANALOG)
PIXEL CLOCK 13.5MHz to 162MHz
HORIZONTAL 15KHz to 92KHz
VERTICAL 50Hz to 85Hz
ADJUSTMENT FUNCTION
PROJECTOR / REMOTE CONTROL Brightness / Contrast / Tint / Saturation / Sharpness / Input Signal
Colour Temperature / Tracking / Position / Sharpness / Volume etc... /
COLOR MODE Dynamic, Presentation, Theatre, Photo, Sports, sRGB, Blackboard, Whiteboard,
FOOT ADJUSTER Front-centre
TILT ANGLE 0 to 13 degrees
KEYSTONE CORRECTION Vertical: +/- 5 degrees
PASSWORD PROTECTED FUNCTION (security function) Implemented
MICROPHONE VOLUME/MIX Yes
ANALOGUE RGB I/O
DISPLAY PERFORMANCE Native 1024 x 768 pixels
INPUT SIGNAL Signal type Separate signal
  Video signal Analogue (0.7V p-p, 75ohm / Mac 0.714Vp-p, 75ohm)
  Sync. signal Separate (positive & negative, bi-polarity 2-5 Vpp) / Composite (positive & negative, bi-polarity 2-5Vpp) / Sync-on-green (negative, 0.3Vpp)
  Audio signal 500mVrms / 47k-ohm
INPUT TERMINAL Video D-sub 15pin x 1 Blue moulding
  Audio Stereo mini jack x 1
OUTPUT SIGNAL Video Analog (0.7Vpp, 75ohm / Mac 0.714Vpp, 75ohm)
  Sync. Separate (positive & negative,TTL) /
Composite (positive & negative,TTL) /
Sync. on green (negative 0.2 - 0.4Vpp)
OUTPUT TERMINAL Video D-sub 15pin x 1 (Black moulding)
VIDEO I/O
DISPLAY PERFORMANCE   NTSC: 560 line PAL: 560 lines (Depends on observation of the multi burst pattern)
INPUT SIGNAL Video standard NTSC / NTSC4.43 / PAL / M-PAL / N-PAL / PAL60 / SECAM
  Video signal Composite Video (1.0Vpp / Sync. negative, 75ohm) /
S-Video (Luminous 0.714Vpp, Chrominous 0.286Vpp, 75ohm) /
Component Video (Analog Y level 0.75V 75ohm / Cr Cb level
+/-0.35V 75ohm / sync. negative 0.3V or 3-state+/-0.3V on Y) /
Video-RGB (0.7Vpp, 75ohm / Mac 0.714Vpp, 75ohm
  Audio signal 500mVrms / 47k-ohm
INPUT TERMINAL Video Composite Video: RCA (Yellow) x1
S-Video: Mini DIN
Component Video: D-sub 15pin Blue molding
  Audio RCA x 2 (White/Red )
USB DISPLAY Display Performance 1024 x 768
  Video Yes
  Audio No
CONTROL I/O
SERIAL I/O Terminal D Sub 9 pin x 1
  Signal RS-232C
USB I/O Terminal USB Type B x1 Ver. 2.0 (USB Display, mouse, K/B)
MICROPHONE Terminal Stereo mini jack 3.5 mm
MEMORY I/O
USB I/O Terminal USB Type A x1 Ver. 2.0 (USB Memory / document camera)
NETWORK I/O
  Network Interface RJ45 x 1
USB I/O Terminal Type A x 1 (Optional wireless LAN unit I/O)
EASY MP
FUNCTION E-mail notification
  SNMP
  Web control
  PJ-Link
  AMX Device Discovery compatible
  Slideshow (photo)
  Network Presentation
  Message Broadcasting
SOFTWARE EasyMP Network Projection Ver.2.61
EasyMP Monitor Ver.4.40
WIRELESS SECURITY WEP, WPA-PSK(TKIP/AES), WPA2-PSK(TKIP/AES)
OPERATING TEMPERATURE 5°C to 35°C (41°F to 95°F) > (20%-80% Humidity )
COOL-DOWN PERIOD "Instant Off"
START-UP PERIOD Approx. 9 seconds (warm up 30 seconds)
DIRECT POWER ON Yes
DIRECT POWER OFF Yes
POWER SUPPLY VOLTAGE 100-240V AC±10% 50/60Hz
POWER CONSUMPTION 100-240VAC 2.7-1.1A 50/60Hz Lamp
343W (Lamp on) 0.3W (standby, network off)
EXHAUST DIRECTION Side
DIMENSION
EXCLUDE FEET 369(D) x 481(W) x 115(H) mm
MAXIMUM DIMENSION 369(D) x 483(W) x 115(H) mm
WEIGHT Approx. 6.2kg (with mounting plate)
FAN NOISE  
HIGH BRIGHTNESS MODE 35dB
LOW BRIGHTNESS MODE 28dB
WARRANTY
STANDARD WARRANTY 3 years*
*excluding lamp
* For more information visit Epson Projector Warranty Website
ACCESSORIES
POWER CORD 5m
REMOTE CONTROL Included
BATTERY Manganese dry cell AA x 2 (for Remote)
PASSWORD PROTECT STICKER Included
EPSON PROJECTOR SOFTWARE Meeting & Monitoring Ver.1.11
OWNER'S MANUAL CD-ROM
PROJECTOR MOUNT Included (Wall mount with adjustable arm)
#Subject to operation and environmental conditions.
Epson is the registered trademark of Seiko Epson Corporation. Epson ESC/P2 and Epson Stylus are trademarks of Seiko Epson Corporation. MicroDot is a trademark of Epson Australia Pty Limited. All other product names and other company names used herein are for identification purposes only and may be the trademarks or registered trademarks of their respective owners. Epson disclaims any and all rights in those marks. Specifications are subject to change without notice.

Equipment supplied by Epson Australia is designed to function in conjunction with genuine Epson consumables and accessories specifically configured for it.


Usage Conditions
Epson products are designed and manufactured to be highly reliable and last a long time when used according to their specifications. With any system, product or device used in situations where human life may be involved or at risk, Epson advises that you should take all necessary steps to ensure the suitability of your Epson product for inclusion in your system, and recommends that you include fail-safe procedures and redundancy support or backup equipment in your system, to maintain the maximum safety margin and optimum system reliability. Examples include but are not limited to - do not interfere with any electrical components within the device, do not use items supplied with the product for purposes other than as intended by Epson (e.g. power cords, inks, CDs, plastic wrapping) and do not make modifications to the product.