Epson EMP-7900

Epson EMP-7900

Installation Multimedia Projectors

The incredibly high quality presentation Projector designed to suit all presentation situations, needs and locations


Overview Specs Consumables Downloads

PRODUCT TYPE Installation Multimedia Projectors
PRODUCT NAME Epson EMP-7900
PRODUCT CODE V11H170053
PROJECTION SYSTEM RGB Liquid Crystal Shutter Projection System
PROJECTION METHOD Front / Rear / Ceiling Mount
SPECIFICATION OF MAIN PARTS
LCD Size 1.0 inches with MLA
  Driving method Poly-Silicon TFT Active Matrix
  Pixel number 786,432 pixels
(1024 x 768) x 3
  Native resolution XGA
  Aspect ratio 4:3
  Pixel arrangement Stripe
  Refresh Rate 72Hz
PROJECTION LENS Type Manual: zoom / focus
  F-number 1.7 - 2.3
  Focus length 28 - 37mm
  Zoom ratio 1:1.35
LAMP Type 250W UHE
OPTICAL SYSTEM Dichroic Mirror Separation & Prism combine method
SCREEN SIZE (PROJECTED DISTANCE) 22 to 300inch [1.1 to 11m] (Zoom: Tele),
30 to 300 inch [0.8 to 8.2m] (Zoom: Wide)
KEYSTONE CORRECTION RATIO 10:0
BRIGHTNESS
High Brightness Mode 4000 Lumens (Colour mode: Dynamic, Zoom: Wide)
Low Brightness Mode 3000 Lumens (Colour mode: Dynamic, Zoom: Wide)
CONTRAST 700:1 (Colour mode: Dynamic)
BRIGHTNESS UNIFORMITY 90% (Typ.)
COLOUR REPRODUCTIVITY Full colour (16.77 million colours)
VIDEO QUALITY 3D Y/C separation (NTSC only), Motion compensated Interlace-Progressive conversion (3-2 film detection only)
SOUND OUTPUT 5W monaural
FUNCTION Effect, PIP, Preview, User Logo, A/V mute, Freeze
COLOUR MODES Pointer, PIP, Preview, User Logo, A/V mute, Freeze
EFFECTIVE SCANNING FREQUENCY RANGE (ANALOG)
PIXEL CLOCK 13.5MHz to 230MHz up to UXGA 85Hz
HORIZONTAL 15KHz to 107KHz
VERTICAL 50Hz to 120Khz
EFFECTIVE SCANNING FREQUENCY RANGE (DIGITAL)
PIXEL CLOCK 25MHz to 135MHz
HORIZONTAL 15KHz to 80KHz
VERTICAL 50Hz to 85Khz
ADJUSTMENT FUNCTION
PROJECTOR / REMOTE CONTROL Keystone / Brightness / Contrast / Tint / Saturation / Sound / Input signal etc.
TILT ANGLE -4 to 12 degrees
KEYSTONE CORRECTION Vertical: -40 to +40 degrees (Zoom: Tele)
Horizontal: -20 to +20 degrees (Zoom: Tele)
AUTO KEYSTONE CORRECTION Implemented (Verticle only)
WALL SHOT Adjusting colour and brightness for wall by sensor.
PASSWORD PROTECTED FUNCTION (security function) Implemented
ANALOGUE RGB I/O
DISPLAY PERFORMANCE Native 1024 x 768 pixels
INPUT SIGNAL Signal type Separate signal
  Video signal Analogue (0.7Vpp, 75ohm / Mac 0.714Vpp, 75ohm)
  Sync. signal Separate (positive & negative, bi-polarity 2-5 Vpp) / Composite (positive & negative, bi-polarity 2-5Vpp) / Sync-on-green (negative, 0.3Vpp)
  Audio signal 500mVrms / 47Kohm
INPUT TERMINAL Video Mini D-sub 15pin x 1 Blue molding 5-BNC x 1
  Audio Stereo mini jack x 1 (for Mini D-sub 5pin) RCA x 2 (FOR 5-BNC)
OUTPUT SIGNAL Video Analog (0.7Vpp, 75ohm / Mac 0.714Vpp, 75ohm)
  Sync. Separate (positive & negative,TTL) /
Composite (positive & negative,TTL) /
Sync. on green (negative 0.3Vpp)
OUTPUT TERMINAL   Video Mini D-sub 15pin x 1 (Black molding)
  Audio Stereo mini jack
DIGITAL RGB INPUT
DISPLAY PERFORMANCE Native 1024 x 768 dots
INPUT SIGNAL Video Signal Digital
  Audio Signal 500mVrms / 47Kohm
INPUT TERMINAL Video DVI TypeD x 1
  Audio Stereo mini jack (double use with D-sub 15-pin)
VIDEO I/O
DISPLAY PERFORMANCE   NTSC: 550 line PAL: 550 line (Depends on observation of the multi burst pattern)
INPUT SIGNAL Video standard NTSC / NTSC4.43 / PAL / M-PAL / N-PAL / PAL60 / SECAM
  Video signal Composite Video (1.0Vpp / Sync. negative, 75ohm) /
S-Video (Luminous 0.714Vpp, Chrominous 0.286Vpp, 75ohm) /
Component Video (Analog Y level 0.7V 75ohm / Cr Cb level
+/-0.35V 75ohm / sync. negative 0.3V or 3-state+/-0.3V on Y) /
Video-RGB (0.7Vpp, 75ohm / Mac 0.714Vpp, 75ohm
  Audio signal 500mVrms / 47Kohm
INPUT TERMINAL Video Composite Video: RCA (Yellow) x1
S-Video: Mini DIN
Component Video: Mini D-sub 15pin Blue molding
(in common with Analog RGB connector)
Video-RGB: Mini D-sub 15pin Blue molding
(in common with Analog RGB connector)
  Audio RCA (White/Red) x2
CONTROL I/O
USB I/O I/O terminal USB connector series B x1 (for mouse control)
SERIAL I/O I/O terminal Mini D-sub 9pin x1
  I/O signal RS-232C
NETWORK INTERFACE RJ45 x 1
INPUT TERMINAL Remote Control Stereo mini jack x 1
OPERATING TEMPERATURE 5°C to 35°C (41°F to 95°F) (20% to 80% Humidity)
POWER SUPPLY VOLTAGE 100 - 240VAC
Lamp ON 350W
Standby (Network ON) 47W
Standby (Network OFF) 1.8W
COOL-DOWN PERIOD Approx. 20 seconds
START-UP PERIOD Approx. 15 seconds
DIMENSION
EXCLUDE FEET 325(D) x 419(W) x 117(H) mm
MAXIMUM DIMENSION 325(D) x 419(W) x 138(H) mm
WEIGHT Approx. 5.6kg
FAN NOISE  
LOW BRIGHTNESS MODE 36dB
HIGH BRIGHTNESS MODE 33dB
WARRANTY
STANDARD WARRANTY 2 years*
*excluding lamp
* For more information visit http://www.epson.com.au/warranty/projector.asp?fromnav=8
ACCESSORIES
POWER CORD 3m
COMPUTER CABLE 1.8m, Mini D-sub 15pin (Male) - Mini D-sub 15pin (Male)
AUDIO CABLE 1.8m Stereo mini jack
MOUSE CABLE 1.8m, USB A/USB B
REMOTE CONTROL Included
LENS COVER Included
BATTERY Alkaline AA x 2
Epson PROJECTOR SOFTWARE EMP Monitor EMP NetworkManager CD-ROM (for Windows)
OWNER'S MANUAL Included
NETWORKING FUNCTION
FUNCTION Projector control and projector management via network
E-mail notification
SNMP
SOFTWARE EMP Monitor (for Windows)
  EMP NetworkManager (for Windows)
ACCESSORIES Epson Projector Software

Epson is the registered trademark of Seiko Epson Corporation. Epson ESC/P2 and Epson Stylus are trademarks of Seiko Epson Corporation. MicroDot is a trademark of Epson Australia Pty Limited. All other product names and other company names used herein are for identification purposes only and may be the trademarks or registered trademarks of their respective owners. Epson disclaims any and all rights in those marks. Specifications are subject to change without notice.

-LL05 V12H004L05 Long Throw Lens ELP-LP22 V12H010L22 Lamp ELP-ST09 V12H007T09 Presentation Remote Control Kit ELP-MB13 V12H003B13 Ceiling Mount ELP-KC11 V12H005C11 15Pin to BNC cable ELP-KC19 V12H005C19 Component Video cable 3YW7900 3YW7900 3rd Year Warranty

Epson is the registered trademark of Seiko Epson Corporation. Epson ESC/P2 and Epson Stylus are trademarks of Seiko Epson Corporation. MicroDot is a trademark of Epson Australia Pty Limited. All other product names and other company names used herein are for identification purposes only and may be the trademarks or registered trademarks of their respective owners. Epson disclaims any and all rights in those marks. Specifications are subject to change without notice.


Equipment supplied by Epson Australia is designed to function in conjunction with genuine Epson consumables and accessories specifically configured for it.


Usage Conditions
Epson products are designed and manufactured to be highly reliable and last a long time when used according to their specifications. With any system, product or device used in situations where human life may be involved or at risk, Epson advises that you should take all necessary steps to ensure the suitability of your Epson product for inclusion in your system, and recommends that you include fail-safe procedures and redundancy support or backup equipment in your system, to maintain the maximum safety margin and optimum system reliability. Examples include but are not limited to - do not interfere with any electrical components within the device, do not use items supplied with the product for purposes other than as intended by Epson (e.g. power cords, inks, CDs, plastic wrapping) and do not make modifications to the product.