Epson EMP-9300

Epson EMP-9300

Installation Multimedia Projectors

Outstanding resolution and contrast to give the clearest, most detailed images available.


Overview Specs Consumables Downloads

PRODUCT TYPE Installation Multimedia Projectors
PRODUCT NAME Epson EMP-9300
PRODUCT CODE V11H071953
PROJECTION SYSTEM RGB Liquid Crystal Shutter Projection System
PROJECTION METHOD Front / Rear / Ceiling Mount
SPECIFICATION OF MAIN PARTS
LCD Size 1.4 inches with MLA (x3)
  Driving method Poly-Silicon TFT Active Matrix
  Pixel number 1470000 dots (1400x1050) x 3
  Native resolution SXGA +
  Aspect ratio 4:3
  Pixel arrangement Stripe
  Refresh rate 60Hz
PROJECTION LENS Type Electrical: zoom / focus /lens shift
  F-number 1.7-2.2
  Focus length 53-72mm
  Zoom ratio 1:1.35
LAMP Type 200W UHE
OPTICAL SYSTEM Dichroic Mirror Separation & prism combine method
SCREEN SIZE (PROJECTED DISTANCE)
(STANDARD ZOOM LENS) 22 to 300inch (1.1 to 15m) (Zoom: Tele)
  30 to 300inch (1.1 to 11m) (Zoom: Wide)
KEYSTONE CORRECTION RATIO 10:1-0:10
BRIGHTNESS
(STANDARD ZOOM LENS) 2500 Lumens
(Lens shift: Center, Colour mode: Dyanmic, Zoom: Wide)
CONTRAST 1100:1
BRIGHTNESS UNIFORMITY 90%(Typ.) (Lens shift : Center)
COLOUR REPRODUCTIVITY Full colour (16.77 million colours)
VEDIO QUALITY 3D Y/C Separation (NTSC only)
  Interlace-Progressive conversion
(3-2/2-2 flim detection, motion detection, jaggy reduction)
SOUND OUTPUT 7W monaural
EFFECTIVE SCANNING FREQUENCY RANGE (ANALOGUE)
PIXEL CLOCK 13.5MHz to 230MHz
HORIZONTAL 15KHz to 107KHz
VERTICAL 50Hz to 120Hz
EFFECTIVE SCANNING FREQUENCY RANGE (DIGITAL)
PIXEL CLOCK 25MHz to 135MHz
HORIZONTAL 15KHz to 80KHz
VERTICAL 50Hz to 85Hz
ADJUSTMENT FUNCTION
TILT ANGLE 0 to 9 degrees
KEYSTONE CORRECTION Vertical: -40 to +40 degrees
Horizontal: -20 to +20 degrees
(Lens shift: Center, Zoom: Tele)
ANALOGUE RGB I/O
DISPLAY PERFORMANCE Native 1400 x 1050 dots
INPUT SIGNAL Signal type Separate signal
  Video signal Analogue (0.7 p-p, 75 ohm/ Mac 0.714Vp-p, 75ohm)
  Sync. signal Separate (positive & negative, bi-polarity 2-5 Vpp) / Composite (positive & negative, bi-polarity 2-5Vpp) / Sync-on-green (negative, 0.3Vpp)
  Audio signal 500m Vrms / 47 K
INPUT TERMINAL Video Mini D-sub 15 pin x 2 Blue-molding
5BNC x 1
  Audio Stereo mini jack x 2 (for mini D-sub 15-pin)
RCA x 2 (for 5 BNC)
OUTPUT TERMINAL   Video Mini D-sub 15pin x 1 Black molding
  Audio Stereo mini jack
DIGITAL RGB I/O
DISPLAY PERFORMANCE Native 1280 x 1024 dots
INPUT SIGNAL Video signal Digital
  Audio signal 500m Vrms / 47kohm
INPUT TERMINAL Video DVI TypeD x 1
  Audio Stereo mini jack
VIDEO I/O
DISPLAY PERFORMANCE   NTSC: 560 line PAL:560 line (Depend on observation of the multi burst pattern)
INPUT SIGNAL Video standard NTSC / NTSC4.43 / PAL / M-PAL / N-PAL / PAL60 / SECAM
  HDTV 480i, 480p, 720p, 1080i (via component BNC)
  Video signal Composite Video (1.0Vpp / Sync.negative, 75ohm) /
S-Video (Luminous 0.714Vpp, Chrominous 0.286Vpp, 75ohm) /
Component Video (Analog Y level 0.7V 75 ohm / Cr Cb level
+/-0.35V 75ohm / sync.negative 0.3V or 3-state+/-0.3V on Y) /
Video-RGB (0.7V p-p,75 ohm / Mac 0.714Vpp,75 ohm)
  Audio signal 500m Vrms / 47 K
INPUT TERMINAL Video Compostie Video (RCA (yellow) x 1)
    S-Video: RCA (Yellow) x 1
    Component Video: Mini D-sub 15pin Blue-molding
(in common with Analog RGB connector)
    Video-RGB: Mini D-sub 15pin Blue-molding
(in common with Analog RGB connector)
  Audio RCA (white/red) x 2
CONTROL I/O
USB I/O I/O terminal USB connector series B x 1 (for mouse, K/B, control)
SERIAL I/O I/O terminal Mini D-sub 9-pin x 1
  I/O signal RS-232C
NETWORK INTERFACE RJ45 x 1
INPUT TERMINAL Remote Control Stereo mini jack x 1
OPERATING TEMPERATURE 5°C to 35°C (41°F to 95°F) (20% to 80% Humidity)
COOL-DOWN PERIOD about 30 seconds
START-UP PERIOD about 40 seconds
POWER SUPPLY VOLTAGE 100 - 240V ±10%, 50/60Hz AC
POWER CONSUMPTION 100 - 240VAC 4 - 2A 50/60Hz
DIMENSION
EXCLUDE PROJECTION LENS & FEET 491(D) x 349(W) x 179(H)mm
MAXIMUM DIMENSION 491(D) x 352(W) x 194(H)mm
WEIGHT Approx. 9.2Kg without lens
Approx. 11.2Kg with Standard Zoom Lens
FAN NOISE 33dB
ACCESSORIES
POWER CORD 3m
COMPUTER CABLE 1.8m, Slim-cable with blue colour jacks, Mini D-sub 15pin (Male) - Mini D-sub 15pin(Male)
REMOTE CONTROL Included
BATTERY Alkaline AA x 2
CABLE COVER Included
LENS COVER Attached
Epson PROJECTOR SOFTWARE CD-ROM
OWNER'S MANUAL Included
SECURITY LABEL Included
WARRANTY
STANDARD WARRANTY 2 years
PRODUCT CODE
  V11H071953

Product Options

Product Code Item Code Description
ELPKS50 V12H001K50 Wheeled Hard Case
ELPLL04 V12H004L04 Long Throw Zoom Lens
ELPLM01 V12H004M01 Middle Throw Zoom Lens(1)
ELPLM02 V12H004M02 Middle Throw Zoom Lens(2)
ELPLR02 V12H004R02 Rear Projection Wide Lens
ELPLS02 V12H004S02 Standard Zoom Lens
ELPLW02 V12H004W02 Wide Zoom Lens
ELPLP26 V13H010L26 Lamp
ELPLW02 V12H004W02 Presentation Remote Control Kit
ELPMB14 V12H003B14 Ceiling Mount
ELPMB15 V12H003B15 Stacking System
ELPKC11 V12H005C11 15Pin to BNC cable
3YW9300 3YW9300 3rd Year Warranty

Epson is the registered trademark of Seiko Epson Corporation. Epson ESC/P2 and Epson Stylus are trademarks of Seiko Epson Corporation. MicroDot is a trademark of Epson Australia Pty Limited. All other product names and other company names used herein are for identification purposes only and may be the trademarks or registered trademarks of their respective owners. Epson disclaims any and all rights in those marks. Specifications are subject to change without notice.


Equipment supplied by Epson Australia is designed to function in conjunction with genuine Epson consumables and accessories specifically configured for it.


Usage Conditions
Epson products are designed and manufactured to be highly reliable and last a long time when used according to their specifications. With any system, product or device used in situations where human life may be involved or at risk, Epson advises that you should take all necessary steps to ensure the suitability of your Epson product for inclusion in your system, and recommends that you include fail-safe procedures and redundancy support or backup equipment in your system, to maintain the maximum safety margin and optimum system reliability. Examples include but are not limited to - do not interfere with any electrical components within the device, do not use items supplied with the product for purposes other than as intended by Epson (e.g. power cords, inks, CDs, plastic wrapping) and do not make modifications to the product.