| SIZE & TYPE |
| Max Print Size |
0.21 x 1m (borderless) |
| Description |
Commercial Photo Printer (extended durability) |
| Form Factor |
Desktop |
| PRINT TECHNOLOGY |
| Main Print Head |
Epson Micro Piezo™ TFP with VSDT, Auto Nozzle Checking & Auto Ink drop Detection |
| Print Mode |
Bi-directional |
| Nozzle Configuration |
180 per colour |
| Maximum Resolution |
1440 x 720dpi (Gloss / Lustre) |
| Minimum Ink Droplet Size |
2.5pl |
| INK SYSTEM |
| Family |
Epson Ultrachrome™ D6r-S  |
| Type |
Aqueous Dye |
| Colours |
C+Y+M+K+Lm+Lc  |
| Pouches |
250 ml per colour |
| PRINT PERFORMANCE |
| Time to First Print |
18.5s Event Mode / 29.5s Normal Mode |
|
| High Speed Single-Sided |
460 4" x 6" prints per hour |
| Standard Single-Sided |
385 4" x 6" prints per hour |
| Standard Double-Sided |
180 4" x 6" prints per hour |
| Figures are provided for comparison purposes only. They represent average and/or typical times based on internal Epson testing using a directly connected printer. Print speeds are based on a job containing 30 jpeg images made borderless using Order Controller, computed from the time taken for the first print to exit to the last. Actual performance will vary depending on a range factors including the number of prints per job, image types, sizes and resolution, PC performance and printer connection, print mode and image length, media type and width. A small amount of media wastage occurs between every print to ensure consistent quality and accurate sizing. If a series of images are printed individually they will take longer to produce than a multi-print job and result in increased media wastage. |
| MEDIA HANDLING |
| Media Support |
Epson Gloss and Lustre SureLab paper in Roll and Sheet format 190, 225 and 250gsm thicknesses (see the Consumables tab for details) |
| Roll Length |
65m |
| Roll Widths |
89mm (3.5”), 102mm (4"), 127mm (5"), 152mm (6"), 203mm (8") & 210mm (A4) |
| Sheet Sizes |
4x6”, 5x7”, 8x10”, 6x6”, A5, A4, 210x210mm (requires Duplex unit) |
| Loading |
Single-sided roll media via spindle (from front)
Double-sided sheet media via optional Duplex unit (holds up to 100 sheets, front bottom) |
| Print Format |
Bordered and Borderless (all widths) |
| Print Lengths |
50mm to 1000mm |
| Media Handling |
Integrated Auto Cutter, Output Heater, Integrated pop-up/pull-out Output Tray |
| Waste Management |
Front mounted waste paper bin with semi-transparent viewing panel Replaceable waste ink (maintenance) tank |
| Output Method |
Front with optional Print Tray (adjustable for prints 50~300mm long) |
| OPERATION |
| Control Panel |
LCD Screen with accompanying menu buttons |
| Colour Modes |
Adobe RGB, SRGB, ICM, manual correction & no correction |
| Interface |
USB 2.0 High Speed, LAN, Wi-Fi |
| Compatibility |
Operation with standard printer driver: Core2 Duo 2GHz or better processor with Win 8.1 (32/64bit) / Mac OSX 10.9 or higher with 1GB memory or greater (4GB recommended) & 32MB or more storage (500GB recommended)
Operation with optional Order Controller: Windows 8.1 (64bit) or higher, 4GB memory (8GB recommended), 250MB storage (500GB or more recommended), 1280x1024 24-bit or higher display, Core2Duo 2GHz or equivalent (Core i5 2.5GHz or faster recommended |
| Physical (WxDxH) |
Simplex 460 x 374 x 343mm, 17.6kg (no output tray or consumables)
Duplex 460 x 438 x 424mm, 23.1kg (no output tray or consumables) |
| Duty Cycle |
400,000 prints* |
| ENVIRONMENT |
| Paper Storage |
15° to 25° C, 20 to 80% Humidity (Gloss andLustre media) |
| Operational Temp |
10° to 35° C (Gloss and Lustre media) |
| Operating Humidity |
20 to 80% (Gloss and Lustre media, no condensation) |
| Power Supply |
100 - 240 V AC, 50/60 Hz, 1.5A @ 220-240V |
| Power Consumption |
80W Operating, 14W Standby, 1.2W Sleep |
| Operating Noise |
50dB |
| Operational Space (WxHxD) |
Simplex 460 x 683 x 359mm
Duplex 460 x 747 x 441mm |
| SHIPPING INFO |
| What’s in the Box |
Printer, Power Cord, USB Cable, 1 x Media Spindle, 1 x Maintenance Tank, Order Controller Lite and Driver S/W, Sample Gloss and Lustre Media & Set-Up Guide, User Guide
NOTE: 1 x 250ml Ink Set is supplied with the printer (shipped separately). A proportion of each ink will be used to 'prime' the machine during initial set-up (this is usually a once-off process). |
| Delivery & Install |
Delivery and installation is not included. If required it can usually be organised by Epson authorised Commercial Printer Dealers at an additional charge. A small amount assembly and configuration will be required and should be discussed with your dealer. |
| Service & Support |
Support and Service is provided via authorised Epson authorised Commercial Printer Dealers. If you have a problem with a SureLab printer, a related option or consumable please contact your dealer for initial problem evaluation. Should a printer require service this will be provided on-site free of charge within the period covered by your Warranty and any optional CoverPlus Pack. Travelling charges may apply for equipment located outside major metro areas &/or with difficult access IMPORTANT: Provision of service and support is subject a range of conditions including correct installation, operation in an appropriate environment, regular and appropriate user maintenance (as directed by the machine &/or in the user manual), and use of correct Epson consumables including ink, media, ribbons, and maintenance items (details can be found on the consumables tab of this web site). Customers are recommended to review the Epson's SureLab Printer Warranty for additional terms and conditions prior to purchase. |
| CONFIGURATION OPTIONS |
| SLD10601Y |
Printer with 1Yr Warranty |
| SLD10603Y |
Printer with 1Yr Warranty + 2 & 3Yr CoverPlus On-Site (Total 3 Yrs Cover)** |
| SLD10605Y |
Printer with 1Yr Wty + 2, 3, 4 & 5Yr CoverPlus On-Site (Total 5 Yrs Cover) ** |
| OPTIONAL ACCESSORIES |
| C12C935981 |
Additional Media Spindle |
| C12C843926 |
Epson Order Controller software |
| C12C848061 |
Epson Layout & ID Software (requires Order Controller) |
| YR2D1060 |
CoverPlus Year 2 On-Site Service Pack*** |
| YR3D1060 |
CoverPlus Year 3 On-Site Service Pack*** |
| YR4D1060 |
CoverPlus Year 4 On-Site Service Pack*** |
| YR5D1060 |
CoverPlus Year 5 On-Site Service Pack*** |
| RELATED PRODUCTS |
| D560 |
SureLab – Dry-film Minilab |
| P5070 |
SureColor 17" Large Format Photo & Graphics Printer |
| P6560D |
SureColor 24" Large Format Photo & Graphics Printer |
| P8560D |
SureColor 44" Large Format Photo & Graphics Printer |
| P8560DL |
SureColor 44" Large Format Photo & Graphics Printer |
| PP-100III |
Disc Producer CD/DVD (100 disc capacity) |
* This is the maximum number of prints (4”x6”) that the major mechanical &/or electrical components are rated for before requiring overhaul &/or replacement. The duty cycle rating does not represent a warranty against component or system failure and relates to the base printer only. The optional Duplex unit has a shorter life expectancy and includes a roller kit that will require periodic user replacement with a consumable part.
** Consumables, media & documentation may be shipped separately with additional volume and weight.
***Printers are covered by a comprehensive 1 year warranty that covers all non-consumable parts (Including Print Heads) & labour with free-on-site service in nominated metro areas (locations outside these will attract an additional travelling charges). Cover can be extended up to a maximum of 5 years through purchase of optional CoverPlus packages. Important: Cover may be restricted or denied if the user does not perform maintenance & cleaning as outlined in the user guide, if equipment is used outside of specification &/or with consumables other than those recommended by Epson Australia. Please refer to the warranty section of this web site for additional details and contact Epson or one of our Authorised Resellers if you have questions. |
