Epson EMP-TW500

Epson EMP-TW500

Home Theatre Projectors

For the Ultimate Cinematic Experience


Overview Specs Consumables Downloads

PRODUCT TYPE Home Theatre Projectors
PRODUCT NAME Epson EMP-TW500
PRODUCT CODE V11H139053
PROJECTION SYSTEM D4 Liquid Crystal Display
PROJECTION METHOD Front / Rear / Ceiling Mount
SPECIFICATION OF MAIN PARTS
LCD Size 0.7 inches wide
  Driving method Poly-Silicon TFT Active Matrix
  Pixel number 1280 x 720 pixels
  Native resolution 720P
  Aspect ratio 16:9
  Pixel arrangement Stripe
  Refresh Rate 50Hz or 60Hz (based on input signal)
PROJECTION LENS Type Powered: zoom / focus
  F-number 2.1-4.3
  Focus length 21.4-31.7mm
  Zoom ratio 1.0:1.5
LAMP Type 200 W UHE
SCREEN SIZE (PROJECTED DISTANCE) 30 to 300 inch (0.87 to 9.11m) (Wide)
30 to 300 inch (1.33 to 13.65m) (Tele)
LENS SHIFT RANGE Vertical: 100% max. (upward), 50% max. (downward)
Horizontal: 50% max. (Left and Right)
BRIGHTNESS
  High Brightness Mode Up to 1000 Lumens (Dynamic & Living Room modes)
  Low Brightness Mode 300 Lumens (Theatre Black Colour Mode)
CONTRAST 1200:1
BRIGHTNESS UNIFORMITY 90% (Typ.)
COLOUR REPRODUCTIVITY 10bit colour processing
EFFECTIVE SCANNING FREQUENCY RANGE
PIXEL CLOCK 13.5MHz to 81MHz
HORIZONTAL 15 to 60KHz
VERTICAL 50 to 85Hz
ADJUSTMENT FUNCTION
PROJECTOR / REMOTE CONTROL Keystone (Vertical) / Brightness / Contrast / Tint / Saturation / Input signal etc.
TILT ANGLE 0 to 2.5 degrees
KEYSTONE CORRECTION Vertical: -15 to +15 degrees
CINEMA FILTER Controlled automatically with color mode (ON: Theatre Black / Theatre / Natural / s-RGB, OFF: Living Room / Dynamic)
ANALOGUE RGB I/O
DISPLAY PERFORMANCE Native 750P
  Resize 1024 x 768 / 800 x 600 / 640 x 480 / 525i / 625i / 525P / 625P / 1125i
INPUT SIGNAL Signal type Separate signal
  Video signal Analog (0.7V p-p,75 ohm/ Mac0.714Vp-p, 75ohm)
  Sync. signal Separate (positive & negative, bi-polarity 2-5Vpp) / Composite (positive & negative, bi-polarity 2-5Vpp) /
Sync-on-green (negative, 0.3Vpp)
INPUT TERMINAL Video 5RCA (Red / Green / Blue / H-sync / V-sync) x 2
VIDEO I/O
COMPONENT INPUT
INPUT SIGNAL Video standard 525i / 625i / 525P / 625P / 750P / 1125i
  Video signal Component Video (Analog Y level 0.7V 75 ohm / Cr Cb level +/-0.35V 75 ohm / sync. negative 0.3V or 3-state +/-0.3V on Y)
INPUT TERMINAL   RCA x 3 (Red / Green / Blue) x 2, D4 video
COMPOSITE / S VIDEO
INPUT SIGNAL Video standard NTSC / NTSC4.43 / PAL / M-PAL / N-PAL / PAL60 / SECAM
  Video signal Composite Video (1.0Vpp / Sync.negative, 75 ohm) /
S-Video (Luminous 0.714Vpp, Chrominous 0.286Vpp, 75 ohm)
INPUT TERMINAL S-Video Mini DIN 4pin
  Video RCA (Yellow) x 1
HDMI
Input Signal Video Standard 525i / 625i / 525P / 625P / 750P / 1125i
  Video Signal TMDS
Input Terminal
 Video HDMI (High Definition Multimedia Interface) x 1
CONTROL I/O
SERIAL I/O I/O terminal Mini D-sub 9 pin x 1
USB-typeB
  I/O signal RS-232c
NETWORK INTERFACE RJ45 x 1  
LOCK FUNCTION Operation Lock, Focus-lock, Zoom-lock
OPERATING TEMPERATURE 5°C to 35 °C <41°F to 95 °F> (20% to 80% Humidity)
COOL-DOWN PERIOD approx 30 seconds
START-UP PERIOD approx 15 seconds
POWER SUPPLY VOLTAGE 100-240 VAC ±10% , 50/60Hz
POWER CONSUMPTION 100-240 VAC 50/60Hz 3.0 - 1.4A
DIMENSIONS
EXCLUDE FEET 450mm(W) x 345mm(D) x 119mm(H)
MAXIMUM DIMENSION 450mm(W) x 345mm(D) x 146.5mm(H)
WEIGHT Approx. 13.8lbs / 6.2kg
FAN NOISE  
High Brightness mode 36dB (Dynamic / Living modes)
Whisper mode 27dB (Theatre / Natural / s-RGB / Theatre Black modes)
ACCESSORIES
POWER CORD 3m
REMOTE CONTROL Stick type (backlight)
BATTERY LR6 <AA> x2
USB CABLE Included 1.8m
Epson CINEMA COLOR EDITOR CD Rom (Win/Mac) Included
USER'S MANUAL Included
QUICK REFERENCE CARD Included
SAFETY INSTRUCTIONS Included
LENS CAP Included
WARRANTY* 2 years
* excluding lamp  
* For more information visit http://www.epson.com.au/warranty/projector.asp?fromnav=8
PRODUCT CODE V11H139053

Product Options

Product Code Item Code Description
ELP-LP28 V13H010L28 Lamp
7011342 7011342 Ceiling Mount with extendable pole (up to 110mm)
3YWTW500 3YWTW500 3rd Year Warranty

Epson is the registered trademark of Seiko Epson Corporation. Epson ESC/P2 and Epson Stylus are trademarks of Seiko Epson Corporation. MicroDot is a trademark of Epson Australia Pty Limited. All other product names and other company names used herein are for identification purposes only and may be the trademarks or registered trademarks of their respective owners. Epson disclaims any and all rights in those marks. Specifications are subject to change without notice.


Equipment supplied by Epson Australia is designed to function in conjunction with genuine Epson consumables and accessories specifically configured for it.


Usage Conditions
Epson products are designed and manufactured to be highly reliable and last a long time when used according to their specifications. With any system, product or device used in situations where human life may be involved or at risk, Epson advises that you should take all necessary steps to ensure the suitability of your Epson product for inclusion in your system, and recommends that you include fail-safe procedures and redundancy support or backup equipment in your system, to maintain the maximum safety margin and optimum system reliability. Examples include but are not limited to - do not interfere with any electrical components within the device, do not use items supplied with the product for purposes other than as intended by Epson (e.g. power cords, inks, CDs, plastic wrapping) and do not make modifications to the product.