Epson EB-Z8000WU

Epson EB-Z8000WU

Installation Multimedia Projectors

The Robust and Reliable, High Brightness WUXGA Projector for Auditoriums and Large Venues




PRODUCT TYPE Large Venue Projector
PRODUCT NAME Epson EB-Z8000WU
PRODUCT CODE V11H266053
PROJECTION SYSTEM RGB Liquid Shutter Projection System
PROJECTION METHOD Front / Rear / Ceiling Mount
SPECIFICATION OF MAIN PARTS
LCD Size 0.94 inches with MLA (x3)
  Driving method Poly-Silicon TFT Active Matrix
  Native resolution 2,304,000 dots (1920 x 1200) x3
  Native Resolution WUXGA
  Aspect ratio 16:10
  Pixel arrangement Cross Stripe
  Refresh Rate 50Hz, 60Hz
PROJECTION LENS Type Power zoom / power focus / power lens shift
  F-number 1.65 - 2.51
  Focus length 36 - 57.35mm
  Zoom ratio 1:1.61
LAMP Type 330W UHE x 2
  Life (estimated) up to 2500 hours (power consumption: Normal)
up to 3500 hours (power consumption: ECO)
OPTICAL SYSTEM Dichroic Mirror Separation & prism combine method
SCREEN SIZE (PROJECTED DISTANCE) (STANDARD ZOOM LENS) 60 to 500 inch (2.21 to 19m) (Zoom: Wide)
60 to 500 inch (3.61 to 30.67m) (Zoom: Tele)
LENS SHIFT RANGE Vertical: -70% to +70% (H Centre) (Powered)
Horizontal: -20% to +20% (V Centre) (Powered)
LIGHT OUTPUT
Normal (2 Lamps) 6,000 Lumens Light Output
6,000 Lumens Colour Light Output
(Colour mode: Dynamic, Zoom: Wide, Lens shift: V Centre / H Centre)
ECO (2 Lamps) 4,800 Lumens Light Output
4,800 Lumens Colour Light Output
(Colour mode: Dynamic, Zoom: Wide, Lens shift: V Centre / H Centre)
CONTRAST 5000:1 (Auto Iris On)
BRIGHTNESS UNIFORMITY 90%(Typ.) (Lens shift : V Centre / H Centre)
COLOUR REPRODUCTIVITY Full colour (16.77 million colours)
VIDEO QUALITY 3D Y/C Separation
  Noise Reduction, Motion compensated Interlace-Progressive conversion (2-2,3-2 film detection)
SOUND OUTPUT NA
EFFECTIVE SCANNING FREQUENCY RANGE (ANALOGUE)
PIXEL CLOCK 13.5MHz to 162MHz
Up to UXGA 60Hz
HORIZONTAL 15 to 80KHz
VERTICAL 50 to 85Hz
EFFECTIVE SCANNING FREQUENCY RANGE (DIGITAL)
PIXEL CLOCK 13.5MHz to 162MHz
Up to UXGA 60Hz
HORIZONTAL 15 to 80KHz
VERTICAL 24Hz, 30Hz, 50Hz, 60Hz
ADJUSTMENT FUNCTION
TILT ANGLE -/+ 3.5 degrees
KEYSTONE CORRECTION Vertical: -30 to +30 degrees
Horizontal: -20 to +20 degrees
(Zoom: Tele)
ANALOGUE RGB I/O
DISPLAY PERFORMANCE Native 1920 x 1200 dots
INPUT SIGNAL Signal type Separate signal
  Video signal Analog (0.7V p-p,75 ohm/ Mac 0.714Vp-p, 75ohm)
  Sync.signal Separate (positive & negative, bi-polarity 2-5Vpp) / Composite (positive & negative, bi-polarity 2-5Vpp) / Sync-on-green (negative, 0.3Vpp)
  Audio signal 500m Vrms / 47 k ohm
INPUT TERMINAL Video Mini D-sub 15 pin x 2 Blue-molding
5BNC x 1
  Audio NA
OUTPUT SIGNAL Video Analog (0.7 Vp-p, 75 ohm / Mac 0.714 Vp-p, 75 ohm)
  Sync. signal Separate (positive & negative, bi-polarity 2-5 Vpp) / Composite (positive & negative, bi-polarity 2-5Vpp) / Sync-on-green (negative, 0.3Vpp)
OUTPUT TERMINAL Video Mini D-sub 15pin x 1 Black molding
  Audio NA
HDMI
DISPLAY PERFORMANCE Native 1920 x 1200 dots
INPUT SIGNAL Version 1.3a
  Resize Video Standards up to 1080p,
PC standards up to UXGA-60,
Wide PC Standards up to WUXGA-60 RB.
Refer to Compatible mode (WUXGA)
  Video Standard 480i / 576i / 480p / 576p / 720p / 1080i / 1080p
  Video signal TMDS
  Input Terminal DVI-D x 1 (HDCP)
DVI
DISPLAY PERFORMANCE Native 1920 x 1200 dots (WUXGA)
INPUT SIGNAL Resize Video Standards up to 1080p,
PC standards up to UXGA-60,
Wide PC Standards up to WUXGA-60 RB.
Refer to Compatible mode (WUXGA)
  Video Standard 480i / 576i / 480p / 576p / 720p / 1080i / 1080p
  Video signal 500 mVrms / 47 k-ohm
  Audio signal NA
INPUT TERMINAL video DVI (Type D) x 1
CONTROL I/O
SERIAL I/O I/O terminal D-sub 9 pin x 1
  I/O signal RS-232C
NETWORK INTERFACE RJ45 X 1
INPUT TERMINAL Remote Control Stereo mini jack x 1
OPERATING TEMPERATURE 0°C to 45°C (32°F to 113°F) (20% to 80% Humidity. unfrozen)
Thermal shut down > 50 °C (122 °F)
0 °C to 40 °C (32 °F to 104 °F)
( over 1500 m / 4921 ft : with High altitude mode , High brightness ) ( 20% - 80% humidity, unfrozen )
DIRECT POWER ON Yes
COOL-DOWN PERIOD Instant off 0 seconds
START-UP PERIOD Approx' 30 seconds
RATED VOLTAGE & CURRENT 100 - 240V AC 50/60Hz 10.7 - 4.5A (16A circuit required)
POWER CONSUMPTION Lamp On 877W (Normal Mode)
Lamp on 734w (ECO Mode)
Standby 13.1W (Network on)
Standby 0.5W (Network off)
DIMENSION
EXCLUDE PROJECTION LENS & FEET 534mm(D) x 734mm(W) x 167mm(H)
MAXIMUM DIMENSION 534mm(D) x 734mm(W) x 225mm(H)
WEIGHT Approx. 22Kg with Standard Zoom Lens
FAN NOISE 32dB (ECO mode)
ACCESSORIES
POWER CORD 3m
COMPUTER CABLE 1.8m, Slim-cable with blue colour jacks, Mini D-sub 15pin (Male) - Mini D-sub 15pin(Male)
REMOTE CONTROL Included
BATTERY Alkaline, AA x2 (Included)
EPSON PROJECTOR SOFTWARE CD-ROM
OWNER'S MANUAL CD-ROM
SECURITY LABEL Included
WARRANTY*
PROJECTOR 4 Years (10,000 hrs)
LAMP 1 Year (750 hrs)
   
* For more information visit Epson Projector Warranty
PRODUCT OPTIONS
Product Code Description
V13H010L51 Replacement Lamp
V13H010L52 2 x Replacement Lamps
V12H134A23 Electrostatic Filter – EB-Z8000WU
V12H003B25 Ceiling Mount for EB-Z8000 series (flush)
V12H003B26 Ceiling Mount for EB-Z8000 series (telescopic)
V12H004S04 Standard Zoom Lens
V12H004R04 Rear Projection Wide Lens
V12H004W04 Wide Zoom Lens
V12H004M06 Middle Throw Lens
V12H004M07 Middle Throw Zoom Lens
V12H004L07 Long Throw Zoom Lens
Epson is the registered trademark of Seiko Epson Corporation. Epson ESC/P2 and Epson Stylus are trademarks of Seiko Epson Corporation. MicroDot is a trademark of Epson Australia Pty Limited. All other product names and other company names used herein are for identification purposes only and may be the trademarks or registered trademarks of their respective owners. Epson disclaims any and all rights in those marks. Specifications are subject to change without notice.

Equipment supplied by Epson Australia is designed to function in conjunction with genuine Epson consumables and accessories specifically configured for it.


Usage Conditions
Epson products are designed and made to give highly reliable use and long life when used according to its specifications. With any system, product or device used in situations where human life may be involved or at risk, Epson advises that you should take all necessary steps to ensure the suitability of your Epson product for inclusion in your system, and recommends that you include fail-safe procedures and redundancy support or backup equipment in your system, to maintain the maximum safety margin and optimum system reliability. Examples include but are not limited to – do not interfere with any electrical components within the device, do not use items supplied with the product for purposes other than as intended by Epson (ie mains cords, inks, CDs, plastic wrapping) and do not make modifications to the product.