SureColor F11060H - 76"
76" Dye Sub Fabric & Soft Signage Printer
| FABRIC & MERCHANDISE - PRINTER | |
|---|---|
| PRODUCT NAME | SureColor F11060H - 76" |
| SIZE | |
|---|---|
| Max Media Width | 76-inch (1950 mm) |
| PRINT TECHNOLOGY | |
|---|---|
| Printhead | 6 x 4.7" Epson PrecisionCore™ TFP |
| Print Modes | Uni & bi-directional |
| Features | Epson Precision Dot with Multi-layer Halftone Variable Sized Droplet Technology (VSDT) On-board Job Connection, Step & Repeat Integrated Media Offset & Crash Sensors Intelligent Auto Feed Management Ink-less Nozzle Status Monitoring Auto Nozzle Masking & Recovery Advanced Print Waveform Advanced Dust control Auto Head Alignment Auto Head Cleaning |
| Nozzle Configuration | 800 x 4 per head/colour |
| Maximum Resolution | 1200 x 1200 dpi |
| Min Droplet Size | 3.8 pl |
| INK SYSTEM | |
|---|---|
| Family | Epson Ultrachrome® DS |
| Type | Dye sublimation |
| Colours | CYM +HDk + (LcLm or OrVi or FyFp) |
| Supply | DUAL bulk ink supply with auto hot-swap |
| Refills | Choice of 3 L or 10 L box type |
| PERFORMANCE | ||
|---|---|---|
| Fast Fabric | 300 x 600 dpi1 (1.1 Pass) |
F11060H: 246 m2/hr |
| Standard Fabric | 300 x 600 dpi2 (1.5 Pass) |
F11060H: 193 m2/hr |
| Fast Apparel | 600 x 600 dpi2 (2.1 Pass) |
F11060H: 144 m2/hr |
| Soft Signage | 600 x 600 dpi2 (3.1 Pass) |
F11060H: 99 m2/hr |
| High Quality | 600 x 1200 dpi3 (5 Pass) |
F11060H: 51 m2/hr |
| Max Quality | 1200 x 1200 dpi4 (9 Pass) |
F11060H: 28 m2/hr |
 Figures represent print times only based on the test sample image as shown, produced 1872 mm x 2340 mm in multiples of 5 with no gaps between prints using Epson Edge Edge Print. Total throughput times for each job will depend on a number of factors, including PC specification, RIP application, workflow, networking, file format / size, image content, paper type and print mode.1300 x 300 dpi with two halftone layers 2300 x 300 dpi with four halftone layers 3300 x 300 dpi with eight halftone layers 4300 x 300 dpi with sixteen halftone layers |
||
| MEDIA SUPPORT | |
|---|---|
| Format | Single roll, 300 - 1950 mm wide |
| Size | Standard: 250 mm max diameter, 60 kg Optional heavy roll feed & take-up systems: 500 mm max diameter, 300 kg |
| Thickness | Up to 1 mm max |
| Min Margins | 7 mm left & right (14 mm when using media holding plates) 5 mm leading & trailing edges |
| Loading | Rear with dual front & rear platen locks. Standard feed system supports rolls up to 60kg with an integrated media lifter. The optional heavy roll feed will require ancillary equipment for loading/unloading. |
| Output | Sheets (manual cutting) Roll-to-roll with integrated auto take-up (914 mm min roll width, 60 kg max weight with the standard take-up, 300kg with the heavy roll take-up) |
| Media Handling | Media presets Epson EMX profile support Pressure reduction spacer support Advanced Auto Tension Control (Ad-ATC) Automatic custom media set-up via RGB camera Selectable event and nozzle pattern check marking Data insertion at media cut for sublimation direction |
| OPERATION | |
|---|---|
| Control Panel | 9" colour touch LCD |
| Interface | Ethernet 1000Base-T (recommended) & high-speed USB 3.0 |
| Memory | 155 GB |
| Language | ESC/P Raster |
| Included Software (Windows) | Epson Communications Driver, EpsonNet Setup, EpsonNet Config, EpsonNet Print, Software Updater, User Guide, Manual Launcher & Video Guide |
| Web Downloads | Epson Edge Dashboard and Edge Print Pro |
| Web Downloads (Mac) | Epson Edge Dashboard, EpsonNet Setup, EpsonNet Config, Software Updater, Software Updater, User Guide (excerpt), Manual Launcher & Video Guide |
| Web Utility | Epson Cloud Solution PORT Activation requires enrolment in the program, connection of the printer to a network with Internet access and allowance for interactive data transfer. |
| ENVIRONMENTAL | |
|---|---|
| Operational Temp | 10° - 35° C (18° - 28° C recommended) |
| Operational Humidity | 20 - 80% with no condensation (40 - 60% recommended) |
| Power Supply | Printer: 2 x 16 A, 240 V, 50/60 Hz AC Optional Heavy Roll Feed: 1 x 10 A, 240 V, 50/60 Hz AC Optional Heavy Roll Take Up: 1 x 16 A, 240 V, 50/60 Hz AC |
| Power Consumption | 4.4 kW operating / 230 W sleep / 9.6 W off Optional Heavy Roll Feed: 42 W operating / 40 W sleep / 0.8 W off Optional Heavy Roll Take Up: TBC |
| Operating Noise | 59 dB |
| Dimensions (W x D x H) | Standard Configuration: 4988 x 1303 x 1886 mm, 781 kg (with ink supply, no ink) With optional Heavy Roll Feed: 4988 x 1740 x 1886 mm, 989 kg With optional Heavy Roll Feed and Heavy Take Up: TBC |
| Operational Space (W x D x H) | 6.0 x 4.0 x 2.0 m recommended (standard configuration) |
| WHAT'S IN THE BOX | |
|---|---|
| Printer, dryer, signal lamp, ink supply system, media guide bar, CYMK x 2 x 3 L ink, 4 L reusable waste bottle, 1 x cleaning kit, 1 x media cleaning brush, 1 x roll of Epson multi-purpose transfer media, 1 x charging unit, 1 x head wiper roll, software license key and setup guide. IMPORTANT: Software and user guides are provided by web download. The media supply and take-up systems must be chosen and ordered separately. The choice of additional inks (2 colours x 2 pieces) must also be selected and ordered separately. |
|
| Packaging (W x D x H)
|
Printer: 3845 x 1135 x 1864 mm, 905 kg Ink supply: 3852 x 1130 x 758 mm, 200 kg Standard Roll and Standard Take Up units: 3852 x 1130 x 718 mm, 170 kg Heavy Roll and Standard Take Up units: 3852 x 2240 x 900 mm, 405 kg Heavy Roll and Heavy Take Up units: 2960 x 2220 x 900mm, 560 kg Ink & media: 1650 x 500 x 500 mm, 50 kg (approx.) |
| SYSTEM REQUIREMENTS | |
|---|---|
| A PC will be required for installation and operation of this printing system. The PC should have a minimum 3 Ghz multicore processor with separate GPU, 8 GB memory, 250 GB HDD (1 TB recommended), running 64-bit Windows 7/8 or OS X/10.6.8 or greater. For optimum performance, it is recommended that 1000Base-T Ethernet networking be employed. A network with external Web access will be required for installation, registration and software activation. Operation of Epson Cloud Solution PORT will require that the printer be connected to a network with Internet access and a router configured for two-way data exchange. The typical operational environment for this printer will require a calendar-style heat press, which will need to be sourced separately. Please speak with your dealer for recommendations. Operation with heavy roll feed and take-up systems will require ancillary equipment to assist with loading and unloading. |
| CONFIGURATIONS | |
|---|---|
| SCF11060H1YR | 6c printer with 1-yr onsite CoverPlus |
| SCF11060H3YR | 6c printer with 3-yr onsite CoverPlus |
| SCF11060H5YR | 6c printer with 5-yr onsite CoverPlus |
| OPTIONS | |
|---|---|
| C12C938461 | Standard roll and standard take-up system |
| SCF11JROSRE | Heavy roll and standard take-up system |
| SCF11JROJRE | Heavy roll and heavy take-up systems |
| YR2F11060H | F11060H CoverPlus year 2 |
| YR3F11060H | F11060H CoverPlus year 3 |
| YR4F11060H | F11060H CoverPlus year 4 |
| YR5F11060H | F11060H CoverPlus year 5 |
| SERVICE & SUPPORT | |
|---|---|
| The printer and any associated options purchased with it is supplied with a limited 30-day warranty that covers parts and labour. A bonus, optional 1-year CoverPlus is included, subject to registration and connection to PORT. The printer may be ordered with additional CoverPlus for a total maximum cover of up to 5 years. Packages with subsidised pricing are available for 3- and 5-year periods. Customers who wish to extend their coverage to 2 or 4 years can purchase additional cover separately. Limitations apply to the provision of warranty and CoverPlus (see below). Support is only provided for product supplied through Epson Australia or Epson New Zealand. The facility is provided in conjunction with the authorised large format reseller through which the product is ordered and Epson’s network of authorised service partners. Service will be provided onsite at no charge for equipment located in major metropolitan areas with ready access. Regional locations and installations with difficult access may receive onsite service subject to imposition of a travelling/access charge. IMPORTANT NOTES Service may be restricted or limited if equipment is not installed in an appropriate environment, not appropriately maintained, be modified, used outside of specificatiampon and/or with non-Epson consumables. For further details on cover, please review the warranty terms listed on this website. If you have additional questions please contact Epson directly. Epson Cloud Solution PORT is a secure cloud-based service that is used to facilitate the provision of support on this model. Agreement to the terms of supply and registration under the program is required to enable fulfilment of CoverPlus. During operation, the printer must remain connected to a network with Internet access via a router configured for two-way data transfer. This model supports user self-replacement of printheads. Operation requires Epson Cloud Solution PORT and nomination of one or more staff members to perform the process. Staff should have moderate technical skills and undergo training, typically during installation. If the nominated staff member leaves, a replacement must be trained, possibly incurring additional charges. |
| Usage Conditions | |
|---|---|
| Epson products are designed and made to give highly reliable use and long life when used according to its specifications. With any system, product or device used in situations where human life may be involved or at risk, Epson advises that you should take all necessary steps to ensure the suitability of your Epson product for inclusion in your system, and recommends that you include fail-safe procedures and redundancy support or backup equipment in your system, to maintain the maximum safety margin and optimum system reliability. Examples include but are not limited to – do not interfere with any electrical components within the device, do not use items supplied with the product for purposes other than as intended by Epson (ie mains cords, inks, CDs, plastic wrapping) and do not make modifications to the product. |
View or Download additional information
Find drivers, manuals and product setup for SureColor F11060H - 76".
Go to Driver Downloads| FABRIC & MERCHANDISE - PRINTER | |
|---|---|
| PRODUCT NAME | SureColor F11060H - 76" |
| SIZE | |
|---|---|
| Max Media Width | 76-inch (1950 mm) |
| PRINT TECHNOLOGY | |
|---|---|
| Printhead | 6 x 4.7" Epson PrecisionCore™ TFP |
| Print Modes | Uni & bi-directional |
| Features | Epson Precision Dot with Multi-layer Halftone Variable Sized Droplet Technology (VSDT) On-board Job Connection, Step & Repeat Integrated Media Offset & Crash Sensors Intelligent Auto Feed Management Ink-less Nozzle Status Monitoring Auto Nozzle Masking & Recovery Advanced Print Waveform Advanced Dust control Auto Head Alignment Auto Head Cleaning |
| Nozzle Configuration | 800 x 4 per head/colour |
| Maximum Resolution | 1200 x 1200 dpi |
| Min Droplet Size | 3.8 pl |
| INK SYSTEM | |
|---|---|
| Family | Epson Ultrachrome® DS |
| Type | Dye sublimation |
| Colours | CYM +HDk + (LcLm or OrVi or FyFp) |
| Supply | DUAL bulk ink supply with auto hot-swap |
| Refills | Choice of 3 L or 10 L box type |
| PERFORMANCE | ||
|---|---|---|
| Fast Fabric | 300 x 600 dpi1 (1.1 Pass) |
F11060H: 246 m2/hr |
| Standard Fabric | 300 x 600 dpi2 (1.5 Pass) |
F11060H: 193 m2/hr |
| Fast Apparel | 600 x 600 dpi2 (2.1 Pass) |
F11060H: 144 m2/hr |
| Soft Signage | 600 x 600 dpi2 (3.1 Pass) |
F11060H: 99 m2/hr |
| High Quality | 600 x 1200 dpi3 (5 Pass) |
F11060H: 51 m2/hr |
| Max Quality | 1200 x 1200 dpi4 (9 Pass) |
F11060H: 28 m2/hr |
| Figures represent print times only based on the test sample image as shown, produced 1872 mm x 2340 mm in multiples of 5 with no gaps between prints using Epson Edge Edge Print. Total throughput times for each job will depend on a number of factors, including PC specification, RIP application, workflow, networking, file format / size, image content, paper type and print mode. 1300 x 300 dpi with two halftone layers 2300 x 300 dpi with four halftone layers 3300 x 300 dpi with eight halftone layers 4300 x 300 dpi with sixteen halftone layers |
||
| MEDIA SUPPORT | |
|---|---|
| Format | Single roll, 300 - 1950 mm wide |
| Size | Standard: 250 mm max diameter, 60 kg Optional heavy roll feed & take-up systems: 500 mm max diameter, 300 kg |
| Thickness | Up to 1 mm max |
| Min Margins | 7 mm left & right (14 mm when using media holding plates) 5 mm leading & trailing edges |
| Loading | Rear with dual front & rear platen locks. Standard feed system supports rolls up to 60kg with an integrated media lifter. The optional heavy roll feed will require ancillary equipment for loading/unloading. |
| Output | Sheets (manual cutting) Roll-to-roll with integrated auto take-up (914 mm min roll width, 60 kg max weight with the standard take-up, 300kg with the heavy roll take-up) |
| Media Handling | Media presets Epson EMX profile support Pressure reduction spacer support Advanced Auto Tension Control (Ad-ATC) Automatic custom media set-up via RGB camera Selectable event and nozzle pattern check marking Data insertion at media cut for sublimation direction |
| OPERATION | |
|---|---|
| Control Panel | 9" colour touch LCD |
| Interface | Ethernet 1000Base-T (recommended) & high-speed USB 3.0 |
| Memory | 155 GB |
| Language | ESC/P Raster |
| Included Software (Windows) | Epson Communications Driver, EpsonNet Setup, EpsonNet Config, EpsonNet Print, Software Updater, User Guide, Manual Launcher & Video Guide |
| Web Downloads | Epson Edge Dashboard and Edge Print Pro |
| Web Downloads (Mac) | Epson Edge Dashboard, EpsonNet Setup, EpsonNet Config, Software Updater, Software Updater, User Guide (excerpt), Manual Launcher & Video Guide |
| Web Utility | Epson Cloud Solution PORT Activation requires enrolment in the program, connection of the printer to a network with Internet access and allowance for interactive data transfer. |
| ENVIRONMENTAL | |
|---|---|
| Operational Temp | 10° - 35° C (18° - 28° C recommended) |
| Operational Humidity | 20 - 80% with no condensation (40 - 60% recommended) |
| Power Supply | Printer: 2 x 16 A, 240 V, 50/60 Hz AC Optional Heavy Roll Feed: 1 x 10 A, 240 V, 50/60 Hz AC Optional Heavy Roll Take Up: 1 x 16 A, 240 V, 50/60 Hz AC |
| Power Consumption | 4.4 kW operating / 230 W sleep / 9.6 W off Optional Heavy Roll Feed: 42 W operating / 40 W sleep / 0.8 W off Optional Heavy Roll Take Up: TBC |
| Operating Noise | 59 dB |
| Dimensions (W x D x H) | Standard Configuration: 4988 x 1303 x 1886 mm, 781 kg (with ink supply, no ink) With optional Heavy Roll Feed: 4988 x 1740 x 1886 mm, 989 kg With optional Heavy Roll Feed and Heavy Take Up: TBC |
| Operational Space (W x D x H) | 6.0 x 4.0 x 2.0 m recommended (standard configuration) |
| WHAT'S IN THE BOX | |
|---|---|
| Printer, dryer, signal lamp, ink supply system, media guide bar, CYMK x 2 x 3 L ink, 4 L reusable waste bottle, 1 x cleaning kit, 1 x media cleaning brush, 1 x roll of Epson multi-purpose transfer media, 1 x charging unit, 1 x head wiper roll, software license key and setup guide. IMPORTANT: Software and user guides are provided by web download. The media supply and take-up systems must be chosen and ordered separately. The choice of additional inks (2 colours x 2 pieces) must also be selected and ordered separately. |
|
| Packaging (W x D x H)
|
Printer: 3845 x 1135 x 1864 mm, 905 kg Ink supply: 3852 x 1130 x 758 mm, 200 kg Standard Roll and Standard Take Up units: 3852 x 1130 x 718 mm, 170 kg Heavy Roll and Standard Take Up units: 3852 x 2240 x 900 mm, 405 kg Heavy Roll and Heavy Take Up units: 2960 x 2220 x 900mm, 560 kg Ink & media: 1650 x 500 x 500 mm, 50 kg (approx.) |
| SYSTEM REQUIREMENTS | |
|---|---|
| A PC will be required for installation and operation of this printing system. The PC should have a minimum 3 Ghz multicore processor with separate GPU, 8 GB memory, 250 GB HDD (1 TB recommended), running 64-bit Windows 7/8 or OS X/10.6.8 or greater. For optimum performance, it is recommended that 1000Base-T Ethernet networking be employed. A network with external Web access will be required for installation, registration and software activation. Operation of Epson Cloud Solution PORT will require that the printer be connected to a network with Internet access and a router configured for two-way data exchange. The typical operational environment for this printer will require a calendar-style heat press, which will need to be sourced separately. Please speak with your dealer for recommendations. Operation with heavy roll feed and take-up systems will require ancillary equipment to assist with loading and unloading. |
| CONFIGURATIONS | |
|---|---|
| SCF11060H1YR | 6c printer with 1-yr onsite CoverPlus |
| SCF11060H3YR | 6c printer with 3-yr onsite CoverPlus |
| SCF11060H5YR | 6c printer with 5-yr onsite CoverPlus |
| OPTIONS | |
|---|---|
| C12C938461 | Standard roll and standard take-up system |
| SCF11JROSRE | Heavy roll and standard take-up system |
| SCF11JROJRE | Heavy roll and heavy take-up systems |
| YR2F11060H | F11060H CoverPlus year 2 |
| YR3F11060H | F11060H CoverPlus year 3 |
| YR4F11060H | F11060H CoverPlus year 4 |
| YR5F11060H | F11060H CoverPlus year 5 |
| SERVICE & SUPPORT | |
|---|---|
| The printer and any associated options purchased with it is supplied with a limited 30-day warranty that covers parts and labour. A bonus, optional 1-year CoverPlus is included, subject to registration and connection to PORT. The printer may be ordered with additional CoverPlus for a total maximum cover of up to 5 years. Packages with subsidised pricing are available for 3- and 5-year periods. Customers who wish to extend their coverage to 2 or 4 years can purchase additional cover separately. Limitations apply to the provision of warranty and CoverPlus (see below). Support is only provided for product supplied through Epson Australia or Epson New Zealand. The facility is provided in conjunction with the authorised large format reseller through which the product is ordered and Epson’s network of authorised service partners. Service will be provided onsite at no charge for equipment located in major metropolitan areas with ready access. Regional locations and installations with difficult access may receive onsite service subject to imposition of a travelling/access charge. IMPORTANT NOTES Service may be restricted or limited if equipment is not installed in an appropriate environment, not appropriately maintained, be modified, used outside of specificatiampon and/or with non-Epson consumables. For further details on cover, please review the warranty terms listed on this website. If you have additional questions please contact Epson directly. Epson Cloud Solution PORT is a secure cloud-based service that is used to facilitate the provision of support on this model. Agreement to the terms of supply and registration under the program is required to enable fulfilment of CoverPlus. During operation, the printer must remain connected to a network with Internet access via a router configured for two-way data transfer. This model supports user self-replacement of printheads. Operation requires Epson Cloud Solution PORT and nomination of one or more staff members to perform the process. Staff should have moderate technical skills and undergo training, typically during installation. If the nominated staff member leaves, a replacement must be trained, possibly incurring additional charges. |
| Usage Conditions | |
|---|---|
| Epson products are designed and made to give highly reliable use and long life when used according to its specifications. With any system, product or device used in situations where human life may be involved or at risk, Epson advises that you should take all necessary steps to ensure the suitability of your Epson product for inclusion in your system, and recommends that you include fail-safe procedures and redundancy support or backup equipment in your system, to maintain the maximum safety margin and optimum system reliability. Examples include but are not limited to – do not interfere with any electrical components within the device, do not use items supplied with the product for purposes other than as intended by Epson (ie mains cords, inks, CDs, plastic wrapping) and do not make modifications to the product. |